(Download) BSNL Junior Engineer (JE) Solved Question Paper - 2016 "held on 27 Sep 2016 |Afternoon shift"
(Download) BSNL Junior Engineer (JE) Solved Question Paper -
2016
"held on 27 Sep 2016 | Afternoon shift"
EXAM DATE : 27092016
EXAM NAME : BSNL Online Examination 2016
TOTAL MARKS : 200
EXAM START TIME : 15:00:00
EXAM DURAITON : 03:00:00
TOTAL NO OF QUESTIONS : 200
Question 1.Pick the Synonym for the word "SLUGGISH"
Options:
a) active
b) energetic
c) inactive
d) suspicious
Correct Answer: inactive
Question 2.Which of the phrases (a), (b) and (c) given below should replace the phrase given in bold in the following sentence to make the sentence grammatically meaningful and correct. If the sentence is correct as it is and no correction is required, mark (d) as the answer.
But in the hectic rush of events, both the military and civilian authorities will fail to make effective use of the information they had collected.
Options:
a) was failed in making effective use of
b) failed to make effective use of
c) fails to make effective use of
d) no correction required
Correct Answer: failed to make effective use of
Question 3.Mark the most appropriate substitute to fill the blanks in the given description :
His habits are very similar ______ mine
Options:
a) Of
b) To
c) On
d) With
Correct Answer: To
Question 4.Choose the odd one from given four choices :
Options:
a) Radio
b) Stereo
c) Gramophone
d) Television
Correct Answer: Television
Question 5.Find out the correct spelt word from the choices given :
Options:
a) Obedeint
b) Obedient
c) Obadeint
d) Obedeant
Correct Answer: Obedient
Question 6.Choose the word which is the exact OPPOSITE of the given words:
EXODUS
Options:
a) Influx
b) Homecoming
c) Return
d) Restoration
Correct Answer: Influx
Question 7.Choose the appropriate word in the blank from the given alternatives.
They ___________________ no notice of what people say about them
Options:
a) Make
b) Mind
c) Take
d) Keep
Correct Answer: Take
Question 8.Change the direct narration to indirect narration :
"If you don't keep quiet I shall shoot you", he said to her in a calm voice.
Options:
a) He said calmly that I shall shoot you if you don't be quiet.
b) He warned her calmly that he would shoot her if she didn't keep quiet.
c) Calmly he warned her that be quiet or else he will have to shoot her.
d) He warned her to shoot if she didn't keep quiet calmly.
Correct Answer: He warned her calmly that he would shoot her if she didn't keep quiet.
Question 9.Select one word which is closest in meaning to the statement in the question : Language which is confused and unintelligible
Options:
a) Jargon
b) Idiom
c) Vernacular
d) Vocabulary
Correct Answer: Jargon
Question 10.Four parts of a sentence (P/Q/R/S) are given. Arrange them in the right order to produce a correct sentence : providence had helped me/to retain my true identity and/changed the course of my life/in the process
Options:
a) PSQR
b) PQSR
c) RSQP
d) PRQS
Correct Answer: PQSR
Question 11.What is the name of the job portal brought under the Common Services Centres initiative?
Options:
a) CSC Rozgarsahayata
b) CSC Rozgarduniya
c) CSC Rozgarmitra
d) CSC Rozgarkaryalaya
Correct Answer: CSC Rozgarmitra
Question 12.Moti Masjid in the Red Fort, Delhi was Constructed by
Options:
a) Shershah
b) Shahjahan
c) Aurangzeb
d) Bhahadurshah Zafar
Correct Answer: Aurangzeb
Question 13.Which "Mobile App" has been launched by TRAI to measure Mobile Internet speed
Options:
a) SpeedAxis
b) WhatSpeed
c) MySpeed
d) MobileSpeed
Correct Answer: MySpeed
Question 14.The present ISRO Chairman
Options:
a) G Madhavan Nair
b) K Radhakrishnan
c) AS Kiran Kumar
d) None of these
Correct Answer: AS Kiran Kumar
Question 15.Who has been appointed as President of International Cricket Council (ICC)?
Options:
a) Zaheer Abbas
b) Mustafa Kamal
c) Austin Garden
d) John Sheriff
Correct Answer: Zaheer Abbas
Question 16.What are you doing? The most suitable answer to the question is
Options:
a) I am in dark sleep
b) I am waiting for someone
c) I was in dark sleep
d) None of these
Correct Answer: I am waiting for someone
Question 17.Mahabharta was written by :
Options:
a) Ved Vyas
b) Valmiki
c) Tulsidas
d) None of these
Correct Answer: Ved Vyas
Question 18.Which of the following is cold blooded animal?
Options:
a) man
b) crow
c) lizard
d) tiger
Correct Answer: lizard
Question 19.The longest National Highway in India runs
from
Options:
a) Kolkata to Jammu
b) Bhopal to Kanyakumari
c) Ambala to Nagarcoil
d) Varanasi to Kanyakumari
Correct Answer: Varanasi to Kanyakumari
Question 20.Which one of the following is described a the Fourth Estate
Options:
a) Executive
b) Legislature
c) Press
d) Judiciary
Correct Answer: Press
Question 21.Find the Inverse Laplace transform of f(p) = 1 / (p1)
Options:
a) 1
b) eat
c) cos at
d) cosh at
Correct Answer: eat
Question 22.The maximum value of (1/x)x
Options:
a) e
b) e1/e
c) (1/e)e
d) None of these
Correct Answer: e1/e
Question 23.
Question 24.The equation of the circle whose two diameters are x=2y and 2x+y=0 and radius = 5 is
Options:
a) x2 + y2 25 = 0
b) x2 + y2 + 25 = 0
c) x2 + y2 + 15 = 0
d) x2 y2 25 = 0
Correct Answer: x2 + y2 + 15 = 0
Question 25.
Options:
a) a = 32/17, 2/17
b) 17/32, 17/2
c) 17/32, 17/2
d) none
Correct Answer: 17/32, 17/2
Question 26.
s
Options:
a) cosechx cothx
b) cosechx cothx
c) sechx cothx
d) sechx cothx
Correct Answer: cosechx cothx
Question 27.If θ is the angle between Two lines whose slopes are m1 & m2, then Tan θ = _____
Options:
a) m1 m2
b) m1 + m2
c) (m1 m2) / (1+ m1 m2)
d) (m1 m2) / (1 m1 m2)
Correct Answer: (m1 m2) / (1+ m1 m2)
Question 28.Find the midpoint of the segment joining the points (4, 2) and (8,6).
Options:
a) (6, 4)
b) (6,4)
c) (2, 2)
d) (2, 2)
Correct Answer: (2, 2)
Question 29.When proving that a quadrilateral is a trapezoid, it is necessary to show
Options:
a) only one set of parallel sides.
b) one set of parallel sides and one set of nonparallel sides.
c) one set of parallel sides and one set of congruent sides.
d) two sets of parallel sides.
Correct Answer: one set of parallel sides and one set of nonparallel sides.
Question 30.When proving that a quadrilateral is a parallelogram by using slopes, you must find:
Options:
a) the slopes of all four sides.
b) the slopes of two opposite sides.
c) the lengths of all four sides.
d) both the lengths and slopes of all four sides.
Correct Answer: the slopes of all four sides.
Question 31.When proving that a triangle is a right triangle using coordinate geometry methods, you must:
Options:
a) show that the slopes of two of the sides are negative reciprocals creating
perpendicular lines and right angles.
b) show that the lengths of the sides satisfy the Pythagorean Theorem, thus
creating a right angle.
c) both
d) none
Correct Answer: both
Question 32.If f(x) = 3x2, then F(x) =
Options:
a) 6x
b) x3
c) x3 + C
d) 6x + C
Correct Answer: x 3 + C
Question 33.A partial differential equation requires
Options:
a) exactly one independent variable
b) two or more independent variables
c) more than one dependent variable
Correct Answer: two or more independent variables
Question 34.If G is a cyclic group of order 24 and a2002=an where a ∈ G and 0 < n < 24. Then the value of n is
Options:
a) 4
b) 6
c) 8
d) 10
Correct Answer: 10
Question 35.Let g(x)=ƒ(x)+ƒ(1x) and ƒ'(x) < 0 for all x ∈ (0,1). Then the interval in which g(x) is increasing is
Options:
a) (1/2,1)
b) 0,1/2
c) (0,1/2) ∪ (1/2,1)
d) none of these
Correct Answer: (1/2,1)
Question 36.The firs iterated kernel of the kernel k(x,t)=ex+t; a=0,b=1 is given by kernel k(x,t)=e
Options:
a) 2ex+t
b) (1/2)ex+t
c) ex+t
d) (e2 1)ex+t
Correct Answer: ex+t
Question 37."Mathematical Expectation of the product of two random variables is equal to the product of their expectations" is true for
Options:
a) any two random variables.
b) if the random variables are independent.
c) if the covariance between the random variables is non zero.
d) if the variance of the random variables are equal.
Correct Answer: if the random variables are independent.
Question 38.Consider the group Z495 under addition modulo 495.
(i) {0,99,198,307,406} is the unique subgroup of Z495 of order 5.
(ii) {0,55,110,165,220,275,330,385,440} is the unique subgroup of Z495 of order
9.
Then,
Options:
a) (i) is true, but (ii) is false
b) (ii) is true, but (i) is false
c) both (i) and (ii) are true
d) both (i) and (ii) are false
Correct Answer: both (i) and (ii) are true
Question 39.A hydrogen atom is excited from n=1 to n=3. What is the value of energy absorbed by the atom ?
Options:
a) 9.06 eV
b) 12.09 eV
c) 13.6 eV
d) 10.2 eV
Correct Answer: 12.09 eV
Question 40.The element with maximum number of its electrons in the valence shell has atomic number
Options:
a) 2
b) 3
c) 9
d) 15
Correct Answer: 2
Question 41.Candela unit according to system international is a
Options:
a) derived unit
b) supplementary unit
c) international unit
d) base unit
Correct Answer: base unit
Question 42.The electronic configuration of "Cr" with atomic number 24 is
Options:
a) 1s2 2s2 2p6 3s2 3p6 3d4 4s2
b) 1s2 2s2 2p6 3s2 3p6 3d6
c) 1s2 2s2 2p6 3s2 3p6 3d5 4s1
d) 1s2 2s2 2p6 3s2 3p6 3d4 4s1 4p1
Correct Answer: 1s2 2s2 2p6 3s+ 3p6 3d5 4s1
Question 43.Which one of the following is not correctly match
Options:
a) kilowatthourenergy
b) Celsiusname of a king
c) Balance wheel in watchinvar
d) newtonforces
Correct Answer: Celsiusname of a king
Question 44.These are used for bloodless surgery
Options:
a) Anesthetic
b) Fiberoptics
c) Lasers
d) None
Correct Answer: Lasers
Question 45.which one of the following is not a unit of time
Options:
a) Micro second
b) Second
c) Year
d) Light year
Correct Answer: Light year
Question 46.Boltzman's constant and planck's constant differ in the dimensions of
Options:
a) Time and temperature
b) Mass and temperature
c) Length and mass
d) Length and time
Correct Answer: Time and temperature
Question 47.Visible light's wavelength range ______________.
Options:
a) 0.39 0.77 mm
b) 0.39 0.77 μm
c) 0.39 0.77 nm
d) 0.39 0.77 cm
Correct Answer: 0.39 0.77 μm
Question 48.Metals are _______.
Options:
a) Transparent
b) Opaque
c) Translucent
d) None
Correct Answer: Opaque
Question 49.Sky looks blue because the sun light is subjected to __________.
Options:
a) Rayleigh scattering
b) Compton scattering
c) Rayleigh scattering and Compton scattering
d) None
Correct Answer: Rayleigh scattering
Question 50.Soft materials absorb large amount of
Options:
a) heat energy
b) light energy
c) electromagnetic waves
d) sound energy
Correct Answer: sound energy
Question 51.Echo of sound is more prominent if surface is
Options:
a) soft
b) rigid
c) porous
d) smooth
Correct Answer: rigid
Question 52.Ratio of sin(x°) of angle of incidence to sin(x°) of angle of refraction is
Options:
a) Gravitational law
b) Reflection law
c) refraction law
d) Snell's law
Correct Answer: Snell's law
Question 53.Bending of light as it passes from one medium to another is called
Options:
a) reflection
b) diffraction
c) refraction
d) deflection
Correct Answer: refraction
Question 54.Refractive index of a medium is
Options:
a) Speed of light in air to speed of light in vacuum
b) Speed of light in vacuum to speed of light in air
c) focal length to object distance
d) speed of light in the medium x speed of light in the air
Correct Answer: Speed of light in air to speed of light in vacuum
Question 55.Color TV has approximate power of
Options:
a) 100
b) 110
c) 120
d) 130
Correct Answer: 120
Question 56.If a vector gets multiplied by a positive number, then its direction
Options:
a) remain same
b) reversed
c) gets half
d) gets double
Correct Answer: remain same
Question 57.Parameters for a RLC circuit are R= 2 Ω,L= 1 H, C= 1 F . If these are connected in series first and then in parallel, the system response for both the circuits will be
Options:
a) underdamped, undamped
b) critically damped, overdamped
c) critically damped, underdamped
d) under damped, critically damped
Correct Answer: critically damped, underdamped
Question 58.An electrolytic capacitor can be used for
Options:
a) DC only
b) AC only
c) Both
d) None
Correct Answer: DC only
Question 59.Find the radius of an isolated sphere capable of being charged to 1 million volt potential before sparking into the air,given that breakdown voltage of air is 3 X 104V/cm
Options:
a) 0.33metre
b) 0.43metre
c) 0.53 metre
d) 0.63 metre
Correct Answer: 0.33metre
Question 60.In an a.c circuit,the ratio of kW/kVA represents
Options:
a) power factor
b) load factor
c) form factor
d) diversity factor
Correct Answer: power factor
Question 61.Gauss's law due to different charge distribution is used to calculate
Options:
a) electric field
b) electric charge
c) electric intensity
d) electric field lines
Correct Answer: electric intensity
Question 62.Relative permeability of vacum is
Options:
a) 4∏x107 H/m
b) 1 H/m
c) 1
d) 4∏
Correct Answer: 1
Question 63.The capacitance of a parallel plate capacitor is not influenced by
Options:
a) Thickness of conducting plates
b) Area of the conducting plates
c) Distance separating the plates 幤Āेटोंकेबीच की दूरी
d) Nature of the dielectric between the plates
Correct Answer: Thickness of conducting plates
Question 64.The direction of induced e.m.f. in a conductor (or coil) can be determined by
Options:
a) work law
b) ampere's law
c) fleming's right hand rule
d) fleming's left hand rule
Correct Answer: fleming's left hand rule
Question 65.Electric Field is defined as
Options:
a) Potential per unit Distance
b) Force Per Unit Charge
c) Voltage per unit Current
d) None of These
Correct Answer: Force Per Unit Charge
Question 66.Electric Field is a
Options:
a) Scalar Quantity
b) Vector Quantity
c) Both Scalar Quantity & Vector Quantity
d) None of these
Correct Answer: Vector Quantity
Question 67.Tesla is the unit of
Options:
a) Magnetic Field
b) Magnetic Flux
c) Electric Field
d) Electric Flux
Correct Answer: Magnetic Field
Question 68.Power Factor of an A C circuit lies between
Options:
a) 0 and 1
b) 1 and 1
c) 1 and 0
d) none of these
Correct Answer: 0 and 1
Question 69.A solar cell is an example of
Options:
a) photo voltaic cell
b) photo conductive cell
c) photo emissive cell
d) photo radiation cell
Correct Answer: photo voltaic cell
Question 70.
Options:
a) 9V, 12V
b) 4V, 8V
c) 16V, 24V
d) 18V, 36V
Correct Answer: 18V, 36V
Question 71.Two lamps of 100W and 200W rated for 220 V are placed in series and a 440V applied across them, then
Options:
a) only 100W lamp will fuse
b) only 200W lamp will fuse
c) both lamps will fuse
d) no lamp will fuse
Correct Answer: only 200W lamp will fuse
Question 72.The internal resistance of a lead acid cell is mainly due to………..
Options:
a) positive plates
b) negative plates
c) both positive and negative plates
d) electrolyte
Correct Answer: both positive and negative plates
Question 73.Electrons in atoms and molecules can change energy levels by emitting or absorbing
Options:
a) Protons
b) Photons
c) electrons
d) All of these
Correct Answer: Photons
Question 74.when a lead acid cell is recharged
Options:
a) The anode becomes dark chocolate brown colour
b) Voltage rises
c) Energy is absorbed by the cell
d) All of these
Correct Answer: All of these
Question 75.A bipolar junction transistor with forward current transfer ratio α=0.98, when working in CE mode, provides current transfer ration β as
Options:
a) 98
b) 0.02
c) 49
d) 0.49
Correct Answer: 49
Question 76.A Series Series feedback amplifier is
Options:
a) Voltage amplifier
b) Current amplifier
c) Transresistance
d) Transconductance
Correct Answer: Transconductance
Question 77.When a BJT is employed as an amplifier it operates
Options:
a) in cutoff
b) in saturation
c) well into saturation
d) over the active region
Correct Answer: over the active region
Question 78.Electronic distribution of an Si atom
Options:
a) 2,10,2
b) 2,8,4
c) 2,7,5
d) 2,4,8
Correct Answer: 2,8,4
Question 79.Diamagnetic materials are
Options:
a) Attracted by Both poles
b) Attracted by North Pole
c) Repelled by North Pole
d) Repelled by Both Poles
Correct Answer: Repelled by Both Poles
Question 80.Ferromagnet can be demagnatised by
Options:
a) Heating to Curie Temperature
b) Keeping Magnet in Alternating fields
c) Exposure to Cyclic Fields
d) All of these
Correct Answer: All of these
Question 81.Botzmann Constant represents the variation of voltage with
Options:
a) Current
b) Resistance
c) Pressure
d) Temperature
Correct Answer: Pressure
Question 82.The depletion layer in pn junction is caused by
Options:
a) drift of holes
b) diffusion of charge carriers
c) migration of impurity ions
d) drift of electrons
Correct Answer: diffusion of charge carriers
Question 83.which of the following configuration is used for Emitter follower Amplifier
Options:
a) Common Base
b) Common Emitter
c) Common Collector
d) None
Correct Answer: Common Collector
Question 84.Semiconductors (e.g. germanium, silicon etc.) are those substances whose electrical conductivity lies in between conductors and insulators. In terms of energy band, the valence band is __________ and conduction band is ___________
Options:
a) almost filled, almost empty
b) almost empty, almost filled
c) almost filled, almost filled
d) almost empty, almost empty
Correct Answer: almost filled, almost empty
Question 85.The current gain of amplifier stage is lowest in
Options:
a) CB configuration
b) CE configuration
c) CC configuration
d) same in all configurations
Correct Answer: CB configuration
Question 86.In a negative feedback amplifier, current sampling
Options:
a) tends to decrease the output resistance
b) tends to increase the output resistance
c) does not alter the output resistance
d) produces the same effect on output resistance as voltage sampling
Correct Answer: tends to increase the output resistance
Question 87.A high Q tuned circuit in a tuned amplifier permits it to have high
Options:
a) selectivity
b) fidelity
c) sensitivity
d) frequency range
Correct Answer: selectivity
Question 88.Crystal oscillator uses
Options:
a) silicon crystal
b) germanium crystal
c) crystal diode
d) piezoelectric quartz crystal
Correct Answer: piezoelectric quartz crystal
Question 89.The pulsating dc applied to power amplifier causes
Options:
a) Burning of transistor
b) Hum in the circuit
c) Excessive forward voltage
d) None of these
Correct Answer: Hum in the circuit
Question 90.Power amplifiers generally use transformer coupling because transformer permit
Options:
a) cooling of the circuit
b) Impedance matching
c) distortionless output
d) good frequency response
Correct Answer: Impedance matching
Question 91.Low efficiency of a power amplifier results in
Options:
a) Low forward bias
b) Less battery consumption
c) More battery consumption
d) none of these
Correct Answer: More battery consumption
Question 92.A semiconductor has generally ________ valance electrons
Options:
a) 2
b) 3
c) 4
d) 6
Correct Answer: 4
Question 93.A 4 bit ripple counter and a bit synchronous counter are made using flip flops having a propagation delay of 10 ns each. If the worst case delay in the ripple counter and the synchronous counter be R and S respectively, then
Options:
a) R = 10 ns, S = 40 ns
b) R = 40 ns, S = 10 ns
c) R = 10 ns S = 30 ns
d) R = 30 ns, S = 10 ns
Correct Answer: R = 40 ns, S = 10 ns
Question 94.The Kmap for a Boolean function is shown in the figure. The number of essential prime implicates for this function is
Options:
a) 4
b) 5
c) 6
d) 8
Correct Answer: 4
Question 95.AND operation of (79)10 and (56)10 result in
Options:
a) 50 H
b) 48 H
c) 42 H
d) 08 H
Correct Answer: 48 H
Question 96.Conversion of +1000 decimal number into signed binary word results
Options:
a) 0000 0011 1110 1000
b) 1000 0011 1110 1000
c) 1111 1100 0001 1000
d) 0111 1100 0001 1000
Correct Answer: 1000 0011 1110 1000
Question 97.BCD input 1000 is fed to a 7 segment display through a BCD to 7 segment decoder/driver. The segments which will lit up are
Options:
a) a, b, d
b) a, b, c
c) a, b, g, c, d
d) a, b, g, c, d, e, f
Correct Answer: a, b, g, c, d, e, f
Question 98.Which one of the following can be used to change data from special code to temporal code
Options:
a) shift registers
b) counters
c) A/D converters
d) combinational circuits
Correct Answer: shift registers
Question 99.Frequencies in UHF range propagate by means of
Options:
a) ground waves
b) sky waves
c) space waves
d) surface waves
Correct Answer: space waves
Question 100.In a transistor which of the following reason is very lightly doped and is very thin
Options:
a) emitter
b) base
c) collector
d) None of these
Correct Answer: base
Question 101.Which of the following is a passive component?
Options:
a) semiconductor devices
b) vaccum tube devices
c) capacitors
d) All of these
Correct Answer: capacitors
Question 102.An infrared LED is usually fabricated from LED
Options:
a) Ge
b) Si
c) Ga As
d) Ga As P
Correct Answer: Ga As P
Question 103.The decimal equivalent of (11011101) is
Options:
a) 225
b) 229
c) 221
d) none
Correct Answer: 225
Question 104.Which of the following classes has lowest efficiency ?
Options:
a) class A
b) class B
c) class AB
d) class C
Correct Answer: class A
Question 105.Logic expressions can be simplified by using
Options:
a) Boolean Algebra Method
b) Karnaugh map Method
c) Tabulation Method
d) any of the these
Correct Answer: any of the these
Question 106.Access Time in Memories is equal to
Options:
a) Latency Time
b) Seek Time
c) Transfer Time
d) sum of all these
Correct Answer: sum of all these
Question 107.The universal gate is
Options:
a) NAND gate
b) OR gate
c) AND gate
d) None of these
Correct Answer: NAND gate
Question 108.An AND circuit
Options:
a) is a memory circuit
b) gives an output when all input signals are present simultaneously
c) is a negative OR circuit
d) is a linear circuit
Correct Answer: gives an output when all input signals are present simultaneously
Question 109.Which of the following is not a sequential circuit?
Options:
a) flipflop
b) counter
c) shift register
d) multiplexer
Correct Answer: multiplexer
Question 110.Most of the memory systems have
Options:
a) electropneumatic properties
b) electrostatic properties
c) magnetic properties
d) all of these
Correct Answer: magnetic properties
Question 111.The commercial efficiency of a shunt generator is maximum when its variable loss equals the _____________ loss.
Options:
a) Constant
b) Stray
c) Iron
d) Friction and windage
Correct Answer: Constant
Question 112.Maximum speed of a synchronous machine for 50 Hz is
Options:
a) 1500 rmp
b) 3000 rpm
c) 20000 rpm
d) 30000 rpm
Correct Answer: 3000 rpm
Question 111.The commercial efficiency of a shunt generator is maximum when its variable loss equals the _____________ loss.
Options:
a) Constant
b) Stray
c) Iron
d) Friction and windage
Correct Answer: Constant
Question 112.Maximum speed of a synchronous machine for 50 Hz is
Options:
a) 1500 rmp
b) 3000 rpm
c) 20000 rpm
d) 30000 rpm
Correct Answer: 3000 rpm
Question 113.A balanced star connected load of (8+j6)Ω per phase is connected to a balanced 3phase 400V Supply. Find the power factor
Options:
a) 0.8 lead
b) 0.8 lag
c) 1
d) 0.6 lag
Correct Answer: 0.8 lag
Question 114.The efficiency of d.c machine is maximum when variable losses are equal to
Options:
a) Constant losses
b) zero
c) Half of constant losses
d) Twice constant losses
Correct Answer: Constant losses
Question 115.Thevenin's theorem is________ form of an equivalent circuit
Options:
a) voltage
b) current
c) both voltage and current
d) none of these
Correct Answer: voltage
Question 116.At the time of starting the motor consumes current ____________ than normal
Options:
a) Same
b) High
c) Low
d) None of these
Correct Answer: High
Question 117.Two resisters are said to be connected in series uniquely if ______________
Options:
a) both carry the same value of current
b) anch currents
c) same current passes in turn through both
d) None of these
Correct Answer: same current passes in turn through both
Question 118.The basic requirement of a d.c. armature winding is that it must be _____________
Options:
a) a lap winding
b) a closed one
c) a wave winding
d) either 'a' or 'c'
Correct Answer: a closed one
Question 119.In order to run an induction motor at synchronous speed ______________
Options:
a) load must be reduced
b) friction at bearing must be reduced
c) e.m.f must be injected in the rotor in a phase with rotor e.m.f
d) e.m.f. must be injected in the rotor in a phase opposite to the rotor e.m.f.
Correct Answer: e.m.f must be injected in the rotor in a phase with rotor e.m.f
Question 120."Cogging" in induction motor occurs when __________
Options:
a) number of stator teethnumber of rotor teeth = odd number
b) number of stator teethnumber of rotor teeth = zero
c) number of stator teethnumber of rotor teeth = even number
d) number of stator teethnumber of rotor teeth = negative number
Correct Answer: number of stator teethnumber of rotor teeth = zero
Question 121. In a synchoronous motor with field underexcited, the power factor will be ____________
Options:
a) lagging
b) leading
c) unity
d) none of these
Correct Answer: lagging
Question 122.Which relay is used for protection of feeders ?
Options:
a) MHO relay
b) Translaty relay
c) Merz Price protection
d) Buchholz relay
Correct Answer: Translaty relay
123.The induced e.m.f. in the armature of a lap wound 4pole d.c. machine having 1000 armature conductors rotating at 600 rpm and with 0.1 wb flux per pole is
Options:
a) 1000 V
b) 100 V
c) 10000 V
d) 10 V
Correct Answer: 10000 V
Question 124.A rectangular waveguide of internal dimensions a=4 cm and b=3 cm is to be operated in TE11 mode. The minimum operating frequency isa
Options:
a) 6.25GHz
b) 12 GHz
c) 3.12 GHz
d) 5 GHz
Correct Answer: 6.25GHz
Question 125.If the carrier of a 100% modulated AM wave is suppressed,the percentage power saving will be
Options:
a) 50
b) 150
c) 100
d) 66.66
Correct Answer: 66.66
Question 126.The basic Data rate of bearer channel in ISDN is
Options:
a) 8 Kbps
b) 16 Kbps
c) 64 Kbps
d) 384 Kbps
Correct Answer: 64 Kbps
Question 127.Which of the following will carry the same information as the AM wave itself ?
Options:
a) SSB
b) VSB
c) DSB
d) All of these
Correct Answer: All of these
Question 128.The disadvantage of FM over AM is that ____________
Options:
a) the noise is very high for high frequency signal
b) high modulating power is required
c) larger bandwidth is required
d) high output power is required
Correct Answer: larger bandwidth is required
Question 129.The input impedance of a line of infinite length is equal to ______________
Options:
a) zero
b) Zo/2
c) Zo
d) Infinity
Correct Answer: Zo
Question 130.Microwave ovens operate at a frequency of __________
Options:
a) 1.37 GHz
b) 2.45 GHz
c) 3.37 GHz
d) 5.52 GHz
Correct Answer: 2.45 GHz
Question 131.Quadrature amplitude modulation is a combination of ______________
Options:
a) PSK & FSK
b) ASK & FSK
c) ASK & ICW
d) ASK & PSK
Correct Answer: ASK & PSK
Question 132.In an amplitude modulated wave, the value of Emax is 10V and Emin is 5V, then percentage of modulation will be
Options:
a) 2%
b) 33.3%
c) 50%
d) 75%
Correct Answer: 2%
Question 133.Typical gain of an amplifier for the UHF channels is
Options:
a) 0 db
b) 2 db
c) 5 db
d) 40 db
Correct Answer: 2 db
Question 134.Which of the following stages has AGC bias
Options:
a) Local oscillator
b) mixer
c) RF ampliffer
d) AFT discriminator
Correct Answer: mixer
Question 135.If the modulation index of an AM wave is 0.6, the power saved for transmission is ____
Options:
a) 0.94
b) 0.9
c) 0.8
d) 0.5
Correct Answer: 0.5
Question 136.TEM mode in coaxial line has on.
Options:
a) no cut off wave length
b) direct current can't pass
c) a, b are true for TEM mode
d) None of these
Correct Answer: a, b are true for TEM mode
Question 137.The velocity factor of a transmission line depends on
Options:
a) Temperature
b) skin effect
c) Relative permittivity of dielectric
d) None of these
Correct Answer: Relative permittivity of dielectric
Question 138.A piece of coaxial cable has a 75 Ω characteristic impedance and a nominal capacitance of 69pF/m. What is the inductance per meter ?
Options:
a) 0.388 H/m
b) 3.88 μH/m
c) 38.8 μH/m
d) 0.388 μH/m
Correct Answer: 0.388 μH/m
Question 139.A parallel plate lossless transmission line consists of brass strips of width w and separated by a distance d . If both w and d are doubled then its characteristic impedance will be
Options:
a) halved
b) doubled
c) not change
d) none of these
Correct Answer: not change
Question 140.For transmission line load matching over a range of frequencies, it is best to use a
Options:
a) Balun
b) Double stub
c) Broadband directional coupler
d) Single stub
Correct Answer: Double stub
Question 141.Altrenately the characteristic impedance is called
Options:
a) Match Impedance
b) Iterative Impedance
c) Surge Impedance
d) Reflected Impedance
Correct Answer: Surge Impedance
Question 142.Johnson noise is
Options:
a) caused by thermal agitation of free electrons carrying current therefore
modulating the current
b) noise carried into a circuit through conductors
c) noise of an electromagnetic origin that is radiated into a ciruit
d) shot noise which results from emission of electrons across a pn junction
Correct Answer: caused by thermal agitation of free electrons carrying current therefore modulating the current
Question 143.PSK and FSK are which type of modulation?
Options:
a) Analog Modulation
b) Digital Modulation
c) Both Analog Modulation & Digital Modulation
d) None of these
Correct Answer: Digital Modulation
Question 144.U interface in ISDN is the interface between
Options:
a) PSTN and Desktop
b) TA and ISDN Phone
c) TA and non ISDN Device
d) TA and PSTN
Correct Answer: TA and PSTN
Question 145.Microwaves propagates through waveguide in
Options:
a) Straight Path
b) Circular Path
c) Zigzag path due to reflection of guide
d) Analog the outer surface of the waveguide
Correct Answer: Zigzag path due to reflection of guide
Question 146.Antennas used in Microwave Communication are
Options:
a) Parabolic antennas
b) Dipole antennas
c) Omni direction Antennas
d) All of these
Correct Answer: Parabolic antennas
Question 147.Standing wave is formed by
Options:
a) Superposition of two waves of Same amplitude
b) Superposition of two waves of Same Frequency
c) Superposition of two waves of Same Phase
d) Superposition of two waves of Same Origing
Correct Answer: Superposition of two waves of Same Frequency
Question 148.Impedance inversion may be obtained with ______________
Options:
a) a short circuited stub
b) an open circuited stub
c) a quarter wave line
d) a half wave line
Correct Answer: a quarter wave line
Question 149.Thevenin's theorem reduces a two terminal network to a
Options:
a) One terminal network
b) current generator in parallel with an impedance
c) Voltage generator in series with an impedance
d) combination of current and voltage generator
Correct Answer: combination of current and voltage generator
Question 150. The wave applied to X plates in a CRO, for obtaining trace of voltage wave, is
Options:
a) sawtooth wave
b) sinusoidal wave
c) rectangular wave
d) either (1) or (2)
Correct Answer: sawtooth wave Sawtooth
Question 151. A 300 V voltmeter has an accuracy of ± 2% of full scale deflection. When the reading is 222 V, the actual voltage
Options:
a) lies between 217.56 and 226.44 V
b) lies between 217.4 and 226.6 V
c) lies between 216 and 228 V
d) is exact 222 V
Correct Answer: lies between 216 and 228 V
Question 152.In a CRO which of the following is not a part of electron gun
Options:
a) XY Plates
b) Grid
c) Cathode
d) Accelerating anode
Correct Answer: XY Plates
Question 153.Without a spectrum analyser, it is not possible to determine
Options:
a) carrier frequency
b) antenna pattern
c) pulse width
d) All of these
Correct Answer: carrier frequency
Question 154.In a distortion factor meter, the filter at the front end is used suppress
Options:
a) odd harmonics
b) even harmonics
c) fundamental component
d) dc component
Correct Answer: fundamental component
Question 155.A 0200 V voltmeter has an accuracy of 0.75% of full scale reading. If voltage measured is 100 V, the error is
Options:
a) 3%
b) 2%
c) 1.5%
d) .75%
Correct Answer: 1.5%
Question 156.Repeatability and Reproducitibility are related to
Options:
a) Accuracy of the instrument
b) Precision of the instrument
c) Both Accuracy of the instrument & Precision of the instrument
d) None of these
Correct Answer: Precision of the instrument
Question 157.A 0300 V voltmeter has an error of ± 2% of full scale deflection. What would be the range of reading if true voltage is 30 V?
Options:
a) 24V36V
b) 29.4V30.6V
c) 20V40V
d) none of these
Correct Answer: 24V36V
Question 158.Air cored inductive transducer are suitable for use ________
Options:
a) at lower frequencies
b) at higher frequencies
c) at equal frequencies
d) as are employed for iron cored transducer
Correct Answer: at higher frequencies
Question 159.A vertical amplifier for a CRO can be desinged for __________
Options:
a) only a high gain
b) only a broad bandwidth
c) a constant gain times bandwidth product
d) all of these
Correct Answer: a constant gain times bandwidth product
Question 160.Spectrum analyzer is designed to represent graphically a plot of ____________
Options:
a) amplitude vs phase
b) phase vs frequency
c) amplitude vs time
d) amplitude vs frequency
Correct Answer: amplitude vs frequency
Question 161.DC probes are generally used with a voltmeter to
Options:
a) Decrease its range
b) Increase its range
c) Frequency independent
d) None of these
Correct Answer: Decrease its range
Question 162.A tangent galvanometer is a
Options:
a) primary instrument
b) indicating instrument
c) absolute instrument
d) secondary instrument
Correct Answer: secondary instrument
Question 163.
Options:
a) stable
b) unstable
c) marginally stable
d) more information is required
Correct Answer: unstable
Question 164. For the signal flow graph shown in fig below the graph determinant Δ is
Options:
a) 1bcfgbcfg+cigj
b) 1bcfgcigj+bcfg
c) 1+bc+fg+cigjbcfg
d) 1+bc+fg+bcfgcigj
Correct Answer: 1+bc+fg+bcfgcigj
Question 165. If the characteristic equation of a closed loop system is s2+ 2s + 2 = 0 , then the system is
Options:
a) overdamped
b) critically damped
c) underdamped
d) undamped
Correct Answer: underdamped
Question 166.In the standard form of closed loop transfer function of second order system is given by C(s)/R(s)= ω2n /s2+2ςωns+ω2n The damping ratio ς =0, then the system is
Options:
a) undamped system
b) under damped system
c) critically damped system
d) over damped system
Correct Answer: undamped system
Question 167.In the transient response of a second order system, delay time td is the time required for the response to reach the ____________ of the final value
Options:
a) half
b) 1/√2
c) 25%
d) 10%
Correct Answer: half
Question 168.The effect of addition of poles and zeros on phase margin and gain margin can be most conveniently seen in __________
Options:
a) Bode plot
b) Nyquist plot
c) Root locus
d) Routh hurwitz
Correct Answer: Bode plot
Question 169.Which of the following is used for Nyquist plot?
Options:
a) Characteristic equation
b) close loop function
c) either 'a' or 'b'
d) open loop function
Correct Answer: open loop function
Question 170.The best method for determining the stability and transient response is __________
Options:
a) Root locus
b) Nyquist plot
c) Bode plot
d) none of these
Correct Answer: Root locus
Question 171.The electrical capacitance is analog of ___
Options:
a) Fluid flow
b) Thermal resistance
c) Inertia
d) Spring
Correct Answer: Inertia
Question 172.The operational amplifier used in analog computers should have
Options:
a) very high gain
b) very low gain
c) Gain is not important
d) Low input resistance
Correct Answer: very low gain
Question 173.Usually the control system used should have
Options:
a) No damping action
b) Under damping action
c) Critical damping action
d) Over damping action
Correct Answer: No damping action
Question 174.The unity circle of Nyquist plot corresponds to 0 & B line of Bode plot for
Options:
a) Low frequencies
b) High frequencies
c) All of these
d) None of these
Correct Answer: High frequencies
Question 175.Band width is the range of frequencies for which system gain is
Options:
a) Less than 9 db
b) More than 20 db
c) More than 3 db
d) Less than 10 db
Correct Answer: Less than 10 db
Question 176.An 8085 microprocessor based system uses a 4K X 8 bit RAM whose starting address is AA00H. The address of the last byte in this RAM is
Options:
a) OFFFH
b) 1000H
c) B9FFH
d) BA00H
Correct Answer: B9FFH
Question 177.In the instruction MOV A, M
Options:
a) the content of memory addressed by HL pair is moved to A register
b) The content of A register is moved to memory location addressed by HL pair
c) the 8 bit data is moved to A register
d) none of these
Correct Answer: the content of memory addressed by HL pair is moved to A register
Question 178.The DBMS is divided into
Options:
a) hierarchical mode
b) networking model
c) relational model
d) All of these
Correct Answer: All of these
Question 179.Find the invalid FOR loop structure
Options:
a) FOR I=1 to N DO
b) FOR J=1 TO 10 DO
c) FOR K=1 TO (2*N) DO
d) All of these
Correct Answer: All of these
Question 180.For long distnce communication which of the following data transfer technique is used?
Options:
a) Serial Transfer
b) Parallel Transfer
c) SerialParallel transfer
d) ParallelSerial Transfer
Correct Answer: Serial Transfer
Question 181.system input of the Close loop circuit is output of ______________
Options:
a) Controller after measuring the error
b) Feedback after measuring the output
c) Direct input for desired output
d) All of these
Correct Answer: Controller after measuring the error
Question 182.Which of the following instruction can alter the normal incrementing of the program counter ?
Options:
a) interrrupt
b) call
c) branch
d) all of these
Correct Answer: all of these
Question 183.Which device converts, a decimal input number to binary
Options:
a) accumulator:
b) encoder
c) ALU
d) memory
Correct Answer: ALU
Question 184.In which logic gate, the output is HIGH when all the inputs are LOW?
Options:
a) AND
b) OR
c) NOR
d) NAND
Correct Answer: NOR
Question 185.The word length for computers ranges from
Options:
a) 4 bits to 16 bits
b) 4 bits to 32 bits
c) 4 bits to 12 bits
d) 4 bytes to 32 bytes
Correct Answer: 4 bits to 12 bits
Question 186.There are _____ types of flags in 8086
Options:
a) 8
b) 9
c) 7
d) 4
Correct Answer: 7
Question 187.When the signal on REST IN goes low, which of the following happens in 8085?
Options:
a) The program counter is set to zero
b) The buses are tristated
c) The MPU is reset
d) All of these
Correct Answer: The MPU is reset
Question 188.In 8085, instruction ADD IMMEDIATE to ACCUMULATOR WITH CARRY is represented by the opcode
Options:
a) ADC
b) ACI
c) ADD
d) ADI
Correct Answer: ADD
Question 189.Which among following first generation of MB_Computers had ?
Options:
a) Magnetic Tape and Transistors
b) Integrated Circuits
c) Vaccum Tubes and Magnetic Drum
d) All of these
Correct Answer: Vaccum Tubes and Magnetic Drum
Question 190.The number of bits used to store a BCD digit is:
Options:
a) 8
b) 4
c) 2
d) 1
Correct Answer: 4
Question 191.Manmade noise is caused by
Options:
a) solar eruptions
b) distant stars
c) arc discharge n electrical machine
d) lightining discharges
Correct Answer: arc discharge n electrical machine
Question 192.The maximum power transfer theorem is used in
Options:
a) electronic circuits
b) power system
c) home lighting circuits
d) none of these
Correct Answer: electronic circuits
Question 193.Which of the following is a correct statement ?
Options:
a) Hardware is merely the preparation of printed circuit board for the
connection of microprocessor (μP).
b) Software is to provide the required IC chips for μP
c) Hardware is to develp program and to feed into the computer.
d) Software is the impermanent informational structure.
Correct Answer: Software is the impermanent informational structure.
Question 194.A USTART chip provides ______
Options:
a) half duplex operation
b) full duplex operation
c) duplex operation
d) full duplex operation but cannot work in asynchronous mode
Correct Answer: full duplex operation but cannot work in asynchronous mode
Question 195.Floppy disk is
Options:
a) a primary memory
b) cache memory
c) nothing but hard disk
d) used for backup purpose
Correct Answer: nothing but hard disk
Question 196.How many bits are needed to address 64K memory location
Options:
a) 8
b) 10
c) 16
d) 32
Correct Answer: 8
Question 197.which of the following is fastest memory cell?
Options:
a) core memory
b) semiconductor memory
c) bubble memory
d) superconductor memory
Correct Answer: core memory
Question 198.Which of the following are not peripheral devices?
Options:
a) VDU
b) CPU
c) Printer
d) floppy drive
Correct Answer: Printer
Question 199.Dynamic memory is made up of
Options:
a) flip flop
b) MOS transistor gate MOS
c) magnetic core
d) magnetic bubbles
Correct Answer: MOS transistor gate
Question 200.______ is a structured high level language
Options:
a) C
b) fortran
c) Window
d) JAVA
Correct Answer: C