(Download) BSNL Junior Engineer (JE) Solved Question Paper - 2016 "held on 25 Sep 2016 | Morning shift"
(Download) BSNL Junior Engineer (JE) Solved Question Paper -
2016
"held on 25 Sep 2016 | Morning shift"
EXAM DATE : 25092016
EXAM NAME : BSNL Online Examination 2016
TOTAL MARKS : 200
EXAM START TIME : 10:00:00
EXAM DURAITON : 03:00:00
TOTAL NO OF QUESTIONS : 200
Question 1.Pick the Synonym for the word "SUSTAINED"
Options:
a) sporadic
b) confirmed
c) steady
d) supported
Correct Answer: steady
Question 2.A sentence is given in the Direct/Indirect form. Out of the four alternatives suggested, select the one which best expresses the same sentence in the Indirect/Direct form:
"Please open my bag and check if my Physics notebook is there" Rakesh said to Rajesh.
Options:
a) Rakesh requested Rajesh to open his bag and check if his Physics notebook was
there.
b) Rakesh requested Rajesh to open his bag and see if his Physics notebook is
there.
c) Rakeshasked Rajesh to open his bag and check if his Physics notebook is
there.
d) Rakeshordered Rajesh to open his bag and see if his Physics notebook was
there.
Correct Answer: Rakesh requested Rajesh to open his bag and check if his Physics notebook was there.
Question 3.Mark the most appropriate substitute to fill the blanks in the given description :
You have to leave your shoes ______________the door when you enter the house.
Options:
a) In
b) Over
c) To
d) By
Correct Answer: By
Question 4.Change the following sentences into passive voice :
They greet me cheerfully every morning.
Options:
a) I am greeted cheerfully by them every morning.
b) I am being greeted cheerfully by them every morning.
c) Cheerful greeting is done by them every morning to me.
d) Every morning I was greeted cheerfully.
Correct Answer: I am greeted cheerfully by them every morning.
Question 5.The first two words are related in a particular manner. Select the word from given choices, which is related to third one in the same manner : DISTANCE:MILE ::liquid
Options:
a) water
b) gram
c) scale
d) litre
Correct Answer: litre
Question 6.Choose the word which is the exact OPPOSITE of the given words:
AFFLUENT
Options:
a) affected
b) uneducated
c) rural
d) poor
Correct Answer: poor
Question 7.Choose the appropriate word in the blank from the given alternatives.
On entering the home , he found all jewels ___________.
Options:
a) steal
b) steals
c) stealing
d) stolen
Correct Answer: stolen
Question 8.Change the direct narration to indirect narration :
"Please don't go away", she said.
Options:
a) She told me to go away.
b) She requested me not to go away.
c) She begged that I not go away.
d) She said to please her and not go away.
Correct Answer: She requested me not to go away.
Question 9.Select one word which is closest in meaning to the statement in the question : That which cannot be read
Options:
a) Negligible
b) Illegible
c) Ineligible
d) Incorrigible
Correct Answer: Illegible
Question 10.Four parts of a sentence (P/Q/R/S) are given. Arrange them in the
right order to produce a correct sentence :
even when/are well informed/people engaged in a conversation/their conversation
may be dull
Options:
a) QSPR
b) PRQS
c) SRQP
d) SQRP
Correct Answer: PRQS
Question 11.Excess of amino acids are broken down to form urea in
Options:
a) kidney
b) liver
c) spleen
d) rectum
Correct Answer: liver
Question 12.The science dealing with studuy of tumor
Options:
a) cosmology
b) oncology
c) Ornithology
d) odontology
Correct Answer : oncology
Question 13.Indian National Song is taken from ___________
Options:
a) Geethanjali
b) Durgesh Nandini
c) Bharat Vidatha
d) Anand Math
Correct Answer: Anand Math
Question 14.Uber Cup is associated with
Options:
a) Tennis
b) Hockey
c) Football
d) Badminton
Correct Answer: Badminton
Question 15.BSNL free roaming launched w.e.f.15.6.2015 is applicable on
Options:
a) Outgoing calls
b) Incoming calls
c) Broadband
d) Both incoming and outgoing calls
Correct Answer: Incoming calls
Question 16.Which space probe of NASA recently made the closest approach to Pluto?
Options:
a) New Horizon
b) Pioneer 9
c) Helios
d) Cosmos
Correct Answer: New Horizon
Question 17.Indianorigin Sunita Williams was recently chosen by NASA for the following assignment
Options:
a) To fly to the International Space Station
b) To fly NASA's first commercial space vehicle
c) For spacewalk at ISS
d) For Mars human landing
Correct Answer: To fly NASA's first commercial space vehicle
Question 18.Which city has topped the Swachh Bharat rankings among 476 cities in the country as per the survey conducted by Ministry of Urban Development ?
Options:
a) Mysuru
b) Ahmedabad
c) Chandigarh
d) Chennai
Correct Answer: Mysuru
Question 19.Who was the first Indian to make a movie
Options:
a) H. S. Bhatwadekar
b) Ardeshir Irani
c) Dhundiraj Govind Phalke
d) V. Shantaram
Correct Answer: H. S. Bhatwadekar
Question 20.The 'Armed Forces Flag Day' is observed every year on?
Options:
a) 7Dec
b) 24Jan
c) 30Oct
d) 30Jan
Correct Answer: 7Dec
Question 21.
Options:
a) 1,6
b) 1,6
c) 1,6
d) 1,6
Correct Answer: 1,6
Question 22.
Options:
a) 0
b) 1
c) u
d) eu
Correct Answer: 1
Question 23.
Options:
Question 24.The minimum distance from the point (4, 2) to the Parabola y2 = 8 x will be
a) √2
b) 2√2
c) 2
d) 3√2
Correct Answer: 2√2
Question 25.Identify the true statement
Options:
a) Force is vector quantity and Time Period is scalar quantity
b) Force is scalar and Time Period is scalar quantity
c) Force is vector quantity and Time Period is vector quantity
d) Force is scalar quantity and Time Period is vector quantity
Correct Answer: Force is vector quantity and Time Period is scalar quantity
Question 26.The angle θ between two lines having slopes m1 and m2 is given by
Options:
a) tanθ=(m1m2)
/m1m2
tanθ=(m1m2)
/m1m2
b) tanθ=(m1m2)/1+m1m2
tanθ=(m1m2)
/1+m1m2
c) tanθ=(m1+m2) /m1m2
tanθ=(m1+m2) /m1m2
d) tanθ=(m1m2)/m1+m2
tanθ=(m1m2)
/m1+m2
Correct Answer: tanθ=(m1m2)/1+m1m2
tanθ=(m1m2)/1+m1m2
Question 27.The distance d between two lines y1=mx+c1 and y2=mx+c2 is given by
Options:
a) d=|c1c2|/(√1+m2) d=|c1c2|/(√1+m2)
b) d=|c1+c2|/(√1+m2)
d=|c1+c2|/(√1+m2)
c) d=|c1c2|/(√1+m2)d=|c1c2|/(√1+m2)
d) None of these
Correct Answer: d=|c1c2|/(√1+m2)d=|c1c2|/(√1+m2)
Question 28.If u = x4 + yx3 + 3x2.y2 + 3x2y, Find ∂u / ∂x
Options:
a) 4x3 + 6xy2 + 6xy
b) 12x2 + 6y2 + 6y
c) x3 + y3 + 3xy
d) x3 + 6xy2 + 6xy
Correct Answer: 4x3 + 6xy2 + 6xy
Question 29.Find the differentiation of cos-1 x
Options:
Question 30.The Fourier series of an even periodic function will consist of _______________ terms only
Options:
a) cosine term
b) sine terms
c) cosine and sine term
d) DC and cosine terms
Correct Answer: cosine term
Question 31.0.4 % of 400 is equal to
Options:
a) 16
b) 1.6
c) 0.16
d) 0.016
Correct Answer : 1.6
Question 32.sin(α β)=
Options:
a) sin(α)cos(β) + cos(α)sin(β)
b) sin(α)cos(β) cos(α)sin(β)
c) cos(α)cos(β) sin(α)sin(β)
d) cos(α)cos(β) + sin(α)sin(β)
Correct Answer: sin(α)cos(β) cos(α)sin(β)
Question 33.The maximum value of f(x) = (1+cos x) sin x is
Options:
a) 3
b) 3√3
c) 4
d) 3√3/4
Correct Answer: 3√3/4
Question 34.
Question 35.Absolute value of z = x + iy is
Options:
a) |z|= √(x2y2)
b) |z|= √(x2/y2)
c) |z|= √(x2 y2)
d) |z|= √(x2y2)
Correct Answer: |z|= √(x2y2)
Question 36.Line x+y=4
Options:
a) Never passes through (0,0)
b) Always passes through (0,0)
c) Meets Y axis at y=0
d) Always passes through (0,0)
Correct Answer: Never passes through (0,0)
Question 37.The equation of the straight line which makes intercepts (7/3) and 2/5 on x and y axis respectively is
Options:
a) 6x35y+
14=0
b) 35x6y+
14=0
c) 6x35y+
14=0
d) none
Correct Answer: none
Question 38.
Question 39.The dimension of gravitational constant G is
a) ML-2T-3
b) ML-2
c) ML-2T-2
d) M1L-3T-2
Correct Answer: M1L-3T-2
Question 40.An automobile travels 72Km/hr towards a high wall. The driver sounds a horn of frequency 124 cycle/sec. What is the frequency of the reflected sound heard by the driver? (Velocity of sound = 330 m/sec)
Options:
a) 124 cycles /sec
b) 132 cycles/sec
c) 140 cycles /sec
d) 148 cycles/sec
Correct Answer: 140 cycles /sec
Question 41.The atomic weight and atomic number of an element are A and Z respectively. The number of neutrons in the atom of that element is
a) A
b) Z
c) Z
d) AZ
Correct Answer: AZ
Question 42.γ rays areγ Career
Options:
a) High energy electrons
b) Low energy electrons
c) High energy electromagnetic waves
d) High energy positrons
Correct Answer: High energy electromagnetic waves
Question 43.The maximum number of electrons that can be accommodated by p – sub shell is p
Options:
a) 10
b) 2
c) 6
d) 14
Correct Answer: 6
Question 44.A instrument has sensitivity of 1000 ohms/volt. On the 100 volt scale. The instrument will have internal resistance of
Options:
a) 10 ohms
b) 10000 ohms
c) 1000 ohms
d) 100000 ohms
Correct Answer: 100000 ohms
Question 45.In two wattmeter method of measuring 3phase power, power factor is 0.5 , then one of the wattmeter will read
Options:
a) W/2
b) 0
c) 0.577 W
d) 1.414 W
Correct Answer: 0
Question 46.The pressure coil of a wattmeter should be connected on the supply side of the current coil when
Options:
a) supply voltage is low
b) supply voltage is high
c) load impedance is low
d) load impedance is high
Correct Answer: load impedance is high
Question 47. One of physical quantities which is not a base quantity is
Options:
a) length
b) force
c) mass
d) time
Correct Answer: force
Question 48.According to system international length of substance is measured in
Options:
a) cm
b) m
c) km
d) mm
Correct Answer: m
Question 49.The Atomic Theory was given by
Options:
a) James Chadwick
b) John Dalton
c) J. J. Thomson
d) E. Rutherford
Correct Answer: John Dalton
Question 50.Which one of the following quantities does not have a Unit
Options:
a) Velocity
b) Density
c) Specific gravity
d) Mass
Correct Answer: Specific gravity
Question 51.SI unit of "Inertia"
Options:
a) kgm2
b) kg per metre
c) kg
d) kgm3
Correct Answer: kg
Question 52.Mirage Effect is caused due to
a) Reflection of Light
b) Refraction of Light
c) Scattering and reflection of Light
d) Reflection and Refraction Light
Correct Answer: Reflection and Refraction Light
Question 53.To a stationary man, the frequency of sound source moving towards the man appears to be
Options:
a) higher than the original frequency
b) lower than the original frequency
c) same as original frequency
d) square root of original frequency
Correct Answer: higher than the original frequency
Question 54.Which colour light has the longest wavelength
Options:
a) Violet
b) Yellow
c) Red
d) Green
Correct Answer: Red
Question 55.Sound waves in air are
Options:
a) transverse waves
b) longitudinal waves
c) may be both types
d) none of these
Correct Answer: may be both types
Question 56.The laser produced from stimulated emission has the following characteristic
Options:
a) Monochromatic
b) Coherent
c) very narrow and collimated ray
d) All of these
Correct Answer: All of these
Question 57.A 6 V battery is connected to a 300Ω load. Under these conditions, it is rated at 40 Ah. How long can it supply current to the load?
Options:
a) 1000 h
b) 2000 h
c) 200 h
d) 4000 h
Correct Answer: 2000 h
Question 58. A 12 V source has an internal resistance of 90 Ω . If a load resistance of 20 Ω is connected to the voltage source, the load power, PL isएक
a) 2.38 mW
b) 2.38 W
c) 238 mW
d) 23.8 W
Correct Answer: 238 mW
Question 59.A network consists of a large number of ideal linear resistors, one of which is R and 2 constant ideal sources. The power consumed by R is P1 when only the first source is active and P2 when only the second source is active. If both sources are active simultaneously, then the power consumed by R is
a) P1 ± P2
b) √P1 ± √P2
c) (√P1 ± √P2)
d) (P1 ± P2)
Correct Answer: (√P1 ± √P2)
Question 60.Find the power dissipated in 8 Ω resistors in the circuit
Options:
a) 7.37 W
b) 7.73 W
c) 3.73 W
d) 3.37 W
Correct Answer: 7.37 W
Question 61. Kirchhoff's second law is based on law of conservation of
Options:
a) charge
b) energy
c) momentum
d) mass
Correct Answer: energy
Question 62.During charging the specific gravity of electrolyte of a lead acid battery
Options:
a) increases
b) decreases
c) remains same
d) becomes zero
Correct Answer: increases
Question 63.Norton's theorem states that a complex network connected to a load can be replaced with an equivalence impedance
Options:
a) in series with a current source
b) in parallel with a voltage source
c) in series with a voltage source
d) in parallel with a current source
Correct Answer: in parallel with a current source
Question 64.Two bulbs marked "200 watt200 volts" and "100 watt200 volts" are joined in series to 200 volts supply. Power consumed in circuit is
Options:
a) 300 watt
b) 33 watt
c) 66.66 watt
d) 150watt
Correct Answer: 66.66 watt
Question 65.A capacitor is charged by a constant current of 2 mA and results in a voltage increase of 12 V in a 10 sec interval. The value of capacitance is
Options:
a) 0.75 milli Farad
b) 24 milli Farad
c) 12 milli Farad
d) 1.67 milli Farad
Correct Answer: 1.67 milli Farad
Question 66.Twelve 6 ohm resistor are used as edge to form a cube. The resistance between two diagonally opposite corner of the cube is
Options:
a) 5/6 ohm
b) 6/5 ohm
c) 5 ohm
d) 6 ohm
Correct Answer: 5 ohm
Question 67.The source of a magnetic field is
Options:
a) an isolated magnetic pole
b) static electric charge
c) magnetic substances
d) current loop
Correct Answer: current loop
Question 68.AT/m is the unit of
Options:
a) m.m.f.
b) reluctance
c) magnetizing force
d) magnetic flux density
Correct Answer: magnetizing force
Question 69.A galvanometer may be converted into ammeter or voltmeter. In which of the following cases the resistance of the device will be the largest ?
Options:
a) an ammeter of range 10 A
b) a voltmeter of range 5 volt
c) an ammeter of range 5 A
d) a voltmeter of range 10 V
Correct Answer: a voltmeter of range 10 V
Question 70.Hystersis loss can be reduced by
Options:
a) laminating the magnetic circuit
b) using material of narrow hysteresis loop
c) increasing m.m.f. of the circuit
d) None of these
Correct Answer: using material of narrow hysteresis loop
Question 71.One unit of electricity is
Options:
a) One Kilo volt
b) One Kilo Watt
c) One Kilo Watt Hour
d) One Kilo Amp Hour
Correct Answer: One Kilo Watt Hour
Question 72.Two wires A and B of the same material and length L and 2L have radius r and 2r respectively. The ratio of their specific resistance will be:
Options:
a) 1:1
b) 1:2
c) 1:4
d) 1:8
Correct Answer: 1:1
Question 73.for a given line voltage, four heating coils will produce maximum heat when connected
Options:
a) all in parallel
b) all in series
c) two parallel pairs in series
d) one pair in parallel with the two in series
Correct Answer: all in parallel
Question 74.At low frequenies the material used for transformer core is
Options:
a) copper
b) silicon iron
c) soft iron
d) none
Correct Answer: copper
Question 75.The ideal OPAMP has the following characteristic
a) Ri = ∞, A = ∞, R0 = 0
b) Ri = 0, A = ∞, R0 = 0
c) Ri = ∞, A = ∞, R0 = ∞
d) Ri = 0, A = ∞, R0 = ∞
Correct Answer: Ri = ∞, A = ∞, R0 = 0
Question 76.The correct full wave rectifier circuit is
Question 77.Negative feedback in an amplifer
Options:
a) reduce gain
b) increases freqency and phase distrotions
c) reduces bandwidth
d) increases noise
Correct Answer: reduce gain
Question 78.In case of class A amplifiers, the ratio of efficiency of transformer coupled amplifier to efficiency of a transformer less amplifier is
Options:
a) 0.5
b) 1.0
c) 1.36
d) 2.0
Correct Answer: 2.0
Question 79.When a PN Junction is formed, diffusion current causes
Options:
a) mixing of current carriers
b) forward bias
c) reverse bias
d) barrier potential
Correct Answer: barrier potential
Question 80.Pure Semiconductor Silicon Dopped with Boron forms
Options:
a) pnType
Semiconductor
pntype
b) ntype
Semiconductor
ntype
c) ptype
Semiconductor
ptype
d) nptype
semiconductor
nptype
Correct Answer: ptype Semiconductor ptype
Question 81.Wider Band gap Semiconductors are called:
a) Super conductor
b) Super Isolators
c) Semi Semiconductors
d) Semi Isolators
Correct Answer: Semi Isolators
Question 82.Which of the following is common feature of FET?
Options:
a) They have high input imepdance
b) These are voltage controlled devices
c) They have isolated input & output
d) All of these
Correct Answer: All of these
Question 83.All of the following can propagate through vaccum except
Options:
a) Xrays
b) radio waves
c) light waves
d) sound waves
Correct Answer: sound waves
Question 84.In LCR circuit which one of the following statement is correct
Options:
a) L and R oppose each other
b) R value increases with frequency
c) the inductive reactance increases with frequency
d) the capacitive reactance increases with frequency
Correct Answer: R value increases with frequency
Question 85.Miller sweep has the following data R = 1K ohms, C = 1 PF, V=10 Volts. Its sweep speed is
Options:
a) 103 V/S
b) 106 V/S
c) 104 V/S
d) 1010 V/S
Correct Answer: 1010 V/S
Question 86.In a p-n diode, hole diffuse from pregion to nregion because
Options:
a) there is high concentration of holes in the pregion
b) holes are positively charged
c) holes are urged to move by the barrier potential
d) the free electrons in the nregion
attract the holes.
n
Correct Answer: there is high concentration of holes in the pregion
Question 87.Which of the following method of biasing provides the best operating point stability
Options:
a) Two battery bias
b) Collectortobase
bias
c) Fixed bias
d) Self bias
Correct Answer: Self bias
Question 88.Feedback is said to be positive if
Options:
a) the feedback signal gets subtracted from the input signal
b) the feedback signal gets added to the input signal
c) any increase in the output signal results in a feedback signal which on being
mixed with the input signal causes further increase in magnitude of the output
signal
d) none of these
Correct Answer: any increase in the output signal results in a feedback signal which on being mixed with the input signal causes further increase in magnitude of the output signal
Question 89.Astable multivibrator may be used as
Options:
a) frequency to voltage converter
b) voltage to frequency converter
c) squaring circuit
d) comparator circuit
Correct Answer: voltage to frequency converter
Question 90.The most important consideration in power amplifier is
Options:
a) Biasing the circuit
b) Collector efficiency
c) To keep the transformer cool
d) None of these
Correct Answer: Collector efficiency
Question 91.A transformer coupled class A power amplifier has a load of 100 Ω on the secondary. If the turn ratio is 10:1, what is the value of load appearing on the primary?
Options:
a) 5 kΩ
b) 20 kΩ
c) 100 kΩ
d) 10 kΩ
Correct Answer: 10 kΩ
Question 92.For frequencies below the resonant frequency, a parallel LC circuit behaves as a ________ load
Options:
a) Inductive
b) Resistive
c) Capacitive
d) None of these
Correct Answer: Inductive
Question 93.The advantage of using a dual slope ADC in a digital voltmeter is thatिडिजटल
Options:
a) its conversion time is small
b) its accuracy is high
c) it gives output in BCD format
d) None of these
Correct Answer: its accuracy is high
Question 94.The Boolean experssion Y=AB + CD represents
Options:
a) Two ORs ANDed together
b) A 4input
AND gate
c) Two ANDs ORed together
d) An exclusive OR
Correct Answer: Two ANDs ORed together
Question 95.A 4 bit module 6 ripple counter uses JK flip flop. If the propogation by each flip flop is 50 ns . The maximum clock frequency be used
Options:
a) 5 MHz
b) 10 MHz
c) 4 MHz
d) 20 MHz
Correct Answer: 5 MHz
Question 96.MOD12 and MOD6 counters and multipliers are most commonly used as
MOD12,
MOD6
Options:
a) Frequency counters
b) Multiplexed displays
c) Power consumption meters
d) Digital Colcks
Correct Answer: Digital Colcks
Question 97.Decimal counter using flipflops and feedback, are more popular than a decimal counter of ring type because of
Options:
a) simple decade circuitary required
b) economy in the number of flipflops
c) high speed of operation
d) its availability in IC form
Correct Answer: economy in the number of flipflops
Question 98.The Characteristic Equation of JK Flip Flop is Career
Question 99.Transparent Flip Flops are also called as
Options:
a) Latches
b) Asynchronous Flip Flops
c) Multiplexers
d) Both Latches & Asynchronous Flip Flops
Correct Answer: Asynchronous Flip Flops
Question 100.63 in Decimal System can be written in Binary Systems as
a) 111100
b) 111101
c) 111111
d) 101010
Correct Answer: 111111
Question 101.In a class A amplifier with sinusoidal input signal, the output current flows for :
Options:
a) half the cycle
b) full cycle
c) less than half cycle
d) more than half cycle
Correct Answer: full cycle
Question 102.A moving charge produces:
Options:
a) an electric field only
b) a magnetic field only
c) Both an electric field only & a magnetic field only
d) None of these
Correct Answer: Both an electric field only & a magnetic field only
Question 103.If A and B are two input in AND gates, the AND gate has output of 1, when the values of A and B are
Options:
a) A=0,B=0
b) A=1,B=1
c) A=1, B=0
d) A=0, B=1
Correct Answer: A=0,B=0
Question 104.Which of the following can be used as an inverter
Options:
a) AND
b) NOR
c) OR
d) None of these
Correct Answer: AND
Question 105.The 9's complement of a Decimal digit is the
a) 1's Complement of the Excess3
code for the Digit
b) 2's Complement of the Excess3
code for the Digit
c) 1's Complement of the Excess4
code for the Digit
d) 2's Complement of the Excess4
code for the Digit
Correct Answer: 1's Complement of the Excess3 code for the Digit
Question 106.Hexadecimal equivalent of binary number 10001101011001 is
Options:
a) 2359
b) 9493
c) 8D62
d) 8DF2
Correct Answer: 2359
Question 107.Which of the following statement is true?
Options:
a) A+ ĀB = A
b) A(Ā+ = AB
c) CA + CĀB = CA +CB
d) None of these
Correct Answer: A+ ĀB = A
Question 108.In Boolean algebra, the term sumofproducts means
Options:
a) the AND function of several OR functions
b) the OR function of several AND functions
c) the OR function of several OR functions
d) the AND function of several AND functions
Correct Answer: the OR function of several AND functions
Question 109.The output of a sequential circuit depends on
Options:
a) present inputs
b) past outputs
c) both present and past inputs
d) past inputs
Correct Answer: both present and past inputs
Question 110.A multiplexer is also known as
Options:
a) counter
b) decoder
c) data selector
d) none of these
Correct Answer: data selector
Question 111.Three equal impedances are first connected in star across a balanced 3 phase supply. If connected in delta across the same supply3
a) Phase current will be tripled
b) Phase current will be doubled
c) Line current will become one third
d) Power consumed will increase three fold
Correct Answer: Power consumed will increase three fold
Question 112.The capacitive circuit are used to___________ pf (Power factor)
Options:
a) increases
b) decreases
c) satblizer
d) No effect on
Correct Answer: increases
Question 113.The efficiency of transformer is maximum when
Options:
a) copper loss= twice Iron loss
b) copper loss=half times Iron loss
c) copper loss=Iron Loss
d) no condition for maximum efficiency
Correct Answer: copper loss=Iron Loss
Question 114.A series motor is best suited for driving Career
Options:
a) latches
b) cranes and hoists
c) shears and punches
d) machine tools
Correct Answer: cranes and hoists
Question 115.Materials used for precision resistors should have
Options:
a) low resistivitiy
b) high resistance temperature
c) high themoelectric emf against copper
d) none of these
Correct Answer: none of these
Question 116.In a synchronous motor the magnitude of back emf Eb depends on ______________
Options:
a) speed of the motor
b) load on the motor
c) both speed and stator flux
d) d.c. excitation only
Correct Answer: d.c. excitation only
Question 117.When a 3 phase induction motor is switched on the rotor frequency is ______________
Options:
a) 50 Hz
b) same as supply frequency
c) same as slip frequency
d) zero
Correct Answer: same as supply frequency
Question 118.The regulation of a synchronous motor is ____________
Options:
a) 0.01
b) 1
c) 0.5
d) 0
Correct Answer: 0
Question 119.In a 3Phase star connected system, the line current is
Options:
a) equal to phase current
b) 1/√3 times phase current
c) √3 times phase current
d) 3 times phase current
Correct Answer: 1/√3 times phase current
Question 120.Three equal resistances of 3 ohms each are connected in delta. The star equivalent value of resistance in ohms is
Options:
a) 2
b) 6
c) 2/3
d) 2/6
Correct Answer: 2/6
Question 121.The speed regulation of a synchronous motor is
Options:
a) positive
b) zero
c) negative
d) any of the these
Correct Answer: positive
Question 122.The stator of a split phase type single phase induction motor is provided with
Options:
a) 3 windings
b) 2 windings
c) 1 winding
d) 6 windings
Correct Answer: 1 winding
Question 123.Among the following statements which one is true?
Options:
a) a.c. transmission is more efficient
b) d.c. transmission is more efficient
c) both are equally efficient
d) low voltage d.c. transmission is more efficient
Correct Answer: both are equally efficient
Question 124.Cassegrain feed is used with a parabolic reflector to:
Options:
a) increase the gain of the system
b) increase the bandwidth of the system
c) reduce the size of the main reflector
d) allow the feed to be placed at a convenient point
Correct Answer: allow the feed to be placed at a convenient point
Question 125.The cavity magnetron uses strapping to
Options:
a) prevent mode jumping
b) prevent cathode back heating
c) ensure bunching
d) improve phase focussing effect
Correct Answer: prevent mode jumping
Question 126.Which of the following gives maximum probability of error
Options:
a) ASK
b) FSK
c) PSK
d) DPSK
Correct Answer: ASK
Question 127.A telephone exchange has 9000 subscribers. If the number of calls originating at peak time is 10,000 in one hour, the calling rate is
Options:
a) 0.9
b) 10/9
c) 0.81
d) 0.1
Correct Answer: 10/9
Question 128.A layer which is above the Presentation layer in OSI model is
Options:
a) DataLink Layer
b) Physical Layer
c) Application Layer
d) Session Layer
Correct Answer: Application Layer
Question 129. The synchronous modems are more costly than the asynchronous modems because
Options:
a) They produce large volume of data
b) They contain clock recovery circuit
c) They transmit the data with stop and start bits.
d) They operate with a larger bandwidth
Correct Answer: They contain clock recovery circuit
Question 130.Foster seelay discriminator uses a
Options:
a) Single tuned circuit
b) Double tuned circuit with primary and secondary tuned to the different
frequency
c) Double tuned circuit with primary and secondary tuned to the same frequency
d) None of these
Correct Answer: Double tuned circuit with primary and secondary tuned to the same frequency
Question 131.A transmitter puts out a total power of 2.09 Watts of 30% AM signal. How much power is contained in each of the sidebands?
Options:
a) 2.09 watts
b) 2 Watts
c) 0.09 watts
d) 0.045 watts
Correct Answer: 0.045 watts
Question 132.As compared to PPM, the disadvantage of PDM is that it requires ______________
Options:
a) more samples per second
b) pulses of larger width
c) powerful transmitter
d) none of these
Correct Answer: powerful transmitter
Question 133.Over modulation of transmitter signal is corrected by the adjustment of the __________
Options:
a) speech amplifier
b) power amplifier
c) RF oscillator
d) frequency doubler
Correct Answer: speech amplifier
Question 134.Speech amplifiers are usually operated as
Options:
a) Class A
b) Class B
c) Class C
d) None of these
Correct Answer: Class C
Question 135.Cylindrical cavity resonators are not used with because they have ___
Options:
a) Q that is too low
b) A shape whose resonant frequency is too
c) Harmonically related resonant frequency
d) None of these
Correct Answer: Harmonically related resonant frequency
Question 136.The maximum speed at which the data can be transmitted on standard PCM stream is
Options:
a) 64 kbps
b) 128 kbps
c) 2 Mbps
d) 4 Mbps
Correct Answer: 4 Mbps
Question 137.A purely resistance load ZL is connected to a 50 Ω lossless transmission line such that it has a voltage standing wave ratio of 3. The possible value of ZL
Options:
a) 50 Ω
b) 450 Ω
c) Both 1 & 2
d) None of these
Correct Answer: Both 1 & 2
Question 138.The VSWR can have any value between VSWR
Options:
a) 0 and 1
b) -1
and +1
c) 0 and ∞
d) 1 and ∞
Correct Answer: 1 and ∞
Question 139.For a 2port symmetrical bilateral network, if transmission parameters A = 3 and B = 1 , the value of parameter C is
Options:
a) 3
b) 8
c) 7
d) 9
Correct Answer: 8
Question 140.A line becomes distortion less if
Options:
a) It is properly matched
b) It is terminated into Zo
c) LG = CR
d) LR = GC
Correct Answer: LG = CR
Question 141.Input impedance of a shortcircuited lossless line with length λ/ 4 is
Options:
a) Z0
b) ZERO
c) ONE
d) INFINITY
Correct Answer: INFINITY
Question 142.BRI in ISDN has which of the following channels ?
Options:
a) 30B+1D
b) 2B+1D
c) 30B+2D
d) Only 2 B Channels
Correct Answer: 2B+1D
Question 143.Pollen count and Solar Protons affects the Microwave Link by
Options:
a) Increasing the gain of the receiver
b) Increase in the Interference
c) Increased the Distance Covered
d) None of these
Correct Answer: Increase in the Interference
Question 144.Input impedance of a shorted loss lessline of length λ/4 is _________
Options:
a) infinity
b) zero
c) Z0
d) none of these
Correct Answer: infinity
Question 145.The phase angle corresponding to λ/4 in a standing wave pattern is __________
Options:
a) 180 degree
b) 135 degree
c) 45 degree
d) 90 degree
Correct Answer: 90 degree
Question 146.The attenuator where the series arm Ra is usually made equal to characteristic impedance, is a ________
Options:
a) symmetrical T attenuator
b) symmetrical attenuator
c) bridged T attenuator
d) lattice T attenuator
Correct Answer: bridged T attenuator
Question 147.A filter having two pass bands and seperated by a small frequency band has zero output, the filter is of the type _________
Options:
a) band stop
b) high pass
c) mderived
band pass
mderived
d) band pass
Correct Answer: band stop
Question 148.If an mderived filter section is built with m=1, it will _______
Options:
a) not be physically realizable
b) not act as filter
c) become a prototype section
d) be used only where very high attenuation near cutoff is desired
Correct Answer: become a prototype section
Question 149.Closed circuit technique are based on
Options:
a) superposition theorem
b) Thevenins theorem
c) Kirchoff's current law
d) Kirchoff's voltage law
Correct Answer: Thevenins theorem
Question 150. The dimensions of force areबल
Options:
a) MLT-2
b) ML-1T-2
c) MLT1
d) ML2T-2
Correct Answer: MLT-2
Question 151. For measuring a very high resistance we should use उ
Options:
a) Kelvin's double bridge
b) Wheatstone bridge
c) Megger
d) None of these
Correct Answer: Megger
Question 152.The pressure coil of a dynamometer type wattmeter is
Options:
a) Highly inductive
b) Highly resistive
c) Purely resistive
d) Purely inductive
Correct Answer: Highly resistive
Question 153.The Guage factor of a Resistance wire strain guage, is a measure of
Options:
a) Sensitivity of the Guage
b) Dynamic range of displacement measure
c) Resolution
d) Resistevity
Correct Answer: Sensitivity of the Guage
Question 154.The performance of Servomotors is ______________ Than stepper motors
Options:
a) Very Accurate
b) Highly controlled by feedback
c) Both Very Accurate & Highly controlled by feedback
d) None of these
Correct Answer: Both Very Accurate & Highly controlled by feedback
Question 155.Microwaves have frequency range of
Options:
a) 10 GHz to 30 Ghz
b) 1 Mhz to 100 Mhz
c) 1 GHz to 30 GHz
d) 1 MHz to 300 GHz
Correct Answer: 1 MHz to 300 GHz
Question 156.Sensititivity and Specificity are related to
Options:
a) Accuracy of the instrument
b) Precision of the instrument
c) Both Accuracy of the instrument & Precision of the instrument
d) None of these
Correct Answer: Accuracy of the instrument
Question 157.Precision Rectifier can be used as ______________ with small modifications
Options:
a) Pulse Width Detector
b) Peak Detector
c) Frequency Detector
d) Phase Detector
Correct Answer: Peak Detector
Question 158.Q of a resonant transmission line is _____________
Options:
a) Q=L/R
b) Q=ωL/R
c) Q=ωR/L
d) Q=ω/LR
Correct Answer: Q=ωL/R
Question 159.An LCD requires a power of ____________
Options:
a) 20 W
b) 20 mW
c) 20μW
d) 20 nW
Correct Answer: 20μW
Question 160.A linear scale used in ___
Options:
a) Thermocouple meters
b) Moving iron meters
c) Hotwire meters
d) None of these
Correct Answer: None of these
Question 161.A theretocouple ammeter/voltmeter has ___
Options:
a) A logarithmic law response
b) A square law response
c) A linear law response
d) None of these
Correct Answer: A square law response
Question 162.Strike out the features not to be associated with the rectifier instruments
Options:
a) Small power loss
b) High degree of measuring accuracy
c) High sensitivity
d) None of these
Correct Answer: None of these
Question 163.The system shown in fig. below has steadystate
Options:
a) 0.1
b) 0.9
c) 1
d) 9
Correct Answer: 9
Question 164. The rootlocus diagram for a closedloop feedback system is shown in the figure. The system is overdamped
Options:
a) only if 0 ≤ k ≤ 1
b) only if 1 < k < 5
c) only if k > 5
d) if 0 ≤ k < 1 or k > 5
Correct Answer: if 0 ≤ k < 1 or k > 5
Question 165.Which of the following is an open loop control system
Options:
a) Field controlled D.C. motor
b) Ward leonard control
c) Metadyne
d) Stroboscope
Correct Answer: Field controlled D.C. motor
Question 166.The transfer function of the tacheometer is of the form
Options:
a) Ks
b) K/s
c) K/(s+1)
d) K/[s(s+1)]
Correct Answer: Ks
Question 167.Which of the following is aclosed loop system
Options:
a) electric switch
b) car starter
c) dc generator
d) autopilot
for an aircraft
Correct Answer: autopilot for an aircraft
Question 168.Poles are the complex frequencies of a transfer funtion where the response becomes
Options:
a) infinite
b) zero
c) oscillatory
d) decaying
Correct Answer: infinite
Question 169.Which signal will become zero when the feedback signal and reference signal are equal?
Options:
a) Actuating signal
b) Input signal
c) Reference signal
d) Feed back signal
Correct Answer: Actuating signal
Question 170.High power amplification is achieved by the use of
Options:
a) Magnetic amplifier
b) DC amplifier
c) DC generator
d) Amplidyne
Correct Answer: DC amplifier
Question 171.The system steady state error can be minimized by
Options:
a) decreasing damped frequency
b) decreasing natural frequency
c) Increasing damped frequency
d) Increasing system gain constant K
Correct Answer: decreasing natural frequency
Question 172.The time constant of a servocontrol system can be decreased by
Options:
a) decreasing the inertial of the system
b) decreasing the viscous damping of the system
c) All of these
d) None of these
Correct Answer: decreasing the viscous damping of the system
Question 173.Zero initial conditions mean that the system is
Options:
a) At rest and no energy is stored in any of its components
b) Working with zero reference signal'
c) Working with zero stored energy
d) None of these
Correct Answer: At rest and no energy is stored in any of its components
Question 174.The most important technique used for stability and the transient response of the system is
Options:
a) Nyquist plot
b) Root locus
c) Bode plot
d) Routh Hurwitz criteria
Correct Answer: Nyquist plot
Question 175.Synchro transmitter also acts as an
Options:
a) error detector
b) compensator
c) comperator
d) input to a servomotor
Correct Answer: input to a servomotor
Question 176.The number of memory cycles required to execute the following 8085 instructions
(i) LDA 3000 H
(ii) LXI D, F0F1 H
(i) LDA 3000 H
(ii) LXI D, F0F1 H
Options:
a) 2 for (i) and 2 for (ii)
b) 4 for (i) and 3 for (ii)
c) 3 for (i) and 3 for (ii)
d) 3 for (i) and 4 for (ii)
Correct Answer: 4 for (i) and 3 for (ii)
Question 177.In an 8085 microprocessor, the instruction CMP B has been executed while the content of the accumulator is less than that of register B. As a resultएक
Options:
a) Carry flag will be set but Zero flag will be reset
b) Carry flag will be reset but Zero flag will be set
c) Both Carry flag and Zero flag will be reset
d) Both Carry flag and Zero flag will be set\
Correct Answer: Carry flag will be set but Zero flag will be reset
Question 178.The contents of accumulator after the execution of following instructions will be
MVI A, B7H
ORA A
RAL
Options:
a) 6EH
b) 6FH
c) EEH
d) EFH
Correct Answer: 6FH
Question 179.In 8085 microprocessor, stack works on8085
Options:
a) LILO
b) LIFO
c) FIFO
d) None of these
Correct Answer: LIFO
Question 180.The total size and the total number of Interrupts procedures that can be defined in this memory of 8086 is
Options:
a) 256 Bytes, 256 Procedures
b) 1K Bytes, 256 Procedures
c) 256 Bytes, 1K Procedures
d) 1K Bytes, 1K Procedures
Correct Answer: 1K Bytes, 256 Procedures
Question 181.NMI input is
Options:
a) Edge Triggererd on Negative edge i.e. 1 to 0 transition
b) Edge Triggererd on Positive edge i.e. 0 to 1 transition
c) Level triggered on 1
d) Level triggered on 0
Correct Answer: Edge Triggererd on Positive edge i.e. 0 to 1 transition
Question 182.Keeping in view the stability of the control circuit the feedback factor (x) and gain without feedback (y) for a stable circuit are related as
Options:
a) xy=1
b) x/y<1
c) xy<1
d) x=y
Correct Answer: xy<1
Question 183.Washing maching is example of
Options:
a) Closed Loop control System
b) Open Loop contro system
c) Both Closed Loop control System & Open Loop contro system
d) None of these
Correct Answer: Open Loop contro system
Question 184.Binary 11110 equals ____ in hexadecimal
Options:
a) 2A
b) 2E
c) 1E
d) 2C
Correct Answer: 2A
Question 185.Gate is a circuit with one or more input but out put is
Options:
a) two
b) one
c) three
d) more than 1
Correct Answer: two
Question 186._____ data transmission is more useful when sending information for long distances
Options:
a) Serial
b) Parallel
c) Either
d) Neither
Correct Answer: Neither
Question 187.8085 MPU is
Options:
a) 8 bit
b) 16 bit
c) 32 bit
d) 64 bit
Correct Answer: 64 bit
Question 188.Which of the following languages is suitable for artificial intelligence?
Options:
a) Fortran
b) Basic
c) Prolong
d) 'C'
Correct Answer: Basic
Question 189.Which one of the following task is not done by data link layer?
Options:
a) Framing
b) Error control
c) Flow control
d) Channel coding
Correct Answer: Channel coding
Question 190.X.25 works on __________________ protocol
Options:
a) LAP A
b) LAP B
c) LAP C
d) LAP D
Correct Answer: LAP B
Question 191.The brain of any computer system is
Options:
a) ALU
b) CPU
c) ROM
d) RAM
Correct Answer: CPU
Question 192.MODEM can be classified as equipment of
Options:
a) DCE (data MB_Communication equipment)
b) DTE( DATA terminal equipment)
c) both
d) None of these
Correct Answer: DCE (data MB_Communication equipment)
Question 193.A MB_Computer program that converts an entire program into machine language at one time is called
Options:
a) interpreter
b) simulator
c) compiler
d) commander
Correct Answer: compiler
Question 194.The Q of a radio coil
Options:
a) is independent of frequency
b) increases monotonically as frequency increases
c) decreases monotonically as frequency increases
d) increases up to a certain frequency and decreases beyond that frequency
Correct Answer: increases up to a certain frequency and decreases beyond that frequency
Question 195.A linear circuit is one whose parameters (e.g. resistance)etc.
Options:
a) change with change in current
b) change with change in voltage
c) do not change with voltage and current
d) none of these
Correct Answer: do not change with voltage and current
Question 196.Programmable logic Array (PLA) uses ___________
Options:
a) PROM matrices
b) RAM matrices
c) Silo memory
d) ROM matrices
Correct Answer: ROM matrices
Question 197.Debug is synonymous to ____________
Options:
a) erase
b) exponent
c) trouble shoot
d) emulate
Correct Answer: trouble shoot
Question 198.The following is not an operating system
Options:
a) MSDOS
b) MSOffice
c) MSWindow
d) UNIX
Correct Answer: UNIX
Question 199.The following is a single user operating system
Options:
a) WINDOWS
b) WINDOWSNT
c) UNIX
d) none of these
Correct Answer: WINDOWSNT
Question 200.Active portion contains an operating system that will be loaded
Options:
a) when you start the system only
b) when you reset the system only
c) both when you start the system only and when you reset the system only
d) neither when you start the system only nor when you reset the system only
Correct Answer: when you reset the system only
Click Here To Download Full Paper