(Download) BSNL Junior Engineer (JE) Solved Question Paper - 2016 "held on 25 Sep 2016 |Afternoon shift"
(Download) BSNL Junior Engineer (JE) Solved Question Paper -
2016
"held on 25 Sep 2016 | Afternoon shift"
EXAM DATE : 25092016
EXAM NAME : BSNL Online Examination 2016
TOTAL MARKS : 200
EXAM START TIME : 15:00:00
EXAM DURAITON : 03:00:00
TOTAL NO OF QUESTIONS : 200
Question 1.Pick the Antonym for the word "Abbreviate"
Options:
a) abridge
b) expand
c) achieve
d) accept
Correct Answer: expand
Question 2.A sentence is given in the Direct/Indirect
form. Out of the four alternatives suggested, select the one which best
expresses the same sentence in the
Indirect/Direct form:
"You have all done a marvellous job!" said the teacher.
Options:
a) The teacher said that they have all done a marvellous job.
b) The teacher exclaimed with happiness that they all did a marvellous job.
c) The teacher exclaimed with happiness that their job was marvellous.
d) The teacher exclaimed with happiness that they had all done a marvellous job.
Correct Answer: The teacher exclaimed with happiness that they had all done a marvellous job.
Question 3.Mark the most appropriate substitute to fill
the blanks in the given description :
David cleaned his room by stuffing everything ______________his bed.
Options:
a) In
b) On
c) Under
d) Along
Correct Answer: Under
Question 4.Change the following sentences into passive voice
:
They greet me cheerfully every morning.
Options:
a) I am greeted cheerfully by them every morning.
b) I am being greeted cheerfully by them every morning.
c) Cheerful greeting is done by them every morning to me.
d) Every morning I was greeted cheerfully.
Correct Answer: I am greeted cheerfully by them every morning.
Question 5.The first two words are related in a particular manner. Select the
word from given choices, which is related to third one in the same manner :
GRAIN:SALT::blades:
Options:
a) glass
b) cut
c) grass
d) steel
Correct Answer: grass
Question 6.Choose the word which is the exact OPPOSITE of the given words:
PROSPEROUS
Options:
a) distressed
b) helpless
c) underpriveleged
d) worse
Correct Answer: underpriveleged
Question 7.Choose the appropriate word in the blank from the given alternatives.
They arrived at the conclusion only after _________ all possible avenues of
research.
Options:
a) seeking
b) exploring
c) diagnosing
d) embarking
Correct Answer: exploring
Question 8.Choose the correct plural of the following word:
Roof
Options:
a) Roofs
b) Rooes
c) Ries
d) Roofes
Correct Answer: Roofs
Question 9.Select one word which is closest in meaning to
the statement in the question :
One who possesses many talents
Options:
a) Versatile
b) Nubile
c) Exceptional
d) Gifted
Correct Answer: Versatile
Question 10.Four parts of a sentence (P/Q/R/S) are given.
Arrange them in the right order to produce a correct sentence : even when/are
well
informed/people engaged in a conversation/their conversation may be dull P/ Q/
R/ S
Options:
a) QSPR
b) PRQS
c) SRQP
d) SQRP
Correct Answer: PRQS
Question 11.In India Tropic of Cancer does not pass through which of the state
Options:
a) Roofs
b) Rooes
c) Ries
d) Roofes
Correct Answer: Roofs
Question 9.Select one word which is closest in meaning to
the statement in the question :
One who possesses many talents
Options:
a) Versatile
b) Nubile
c) Exceptional
d) Gifted
Correct Answer: Versatile
Question 10.Four parts of a sentence (P/Q/R/S) are given.
Arrange them in the right order to produce a correct sentence : even when/are
well
informed/people engaged in a conversation/their conversation may be dull P/ Q/
R/ S
Options:
a) QSPR
b) PRQS
c) SRQP
d) SQRP
Correct Answer: PRQS
Question 11.In India Tropic of Cancer does not pass through which of the state
Options:
a) Madhya Pradesh
b) Maharastra
c) Gujarat
d) Chatissgarh
Correct Answer: Maharastra
Question 12.Lowest Literacy state in India, as per 2011 Census 2011
Options:
a) Telangana
b) Bihar
c) Rajasthan
d) Arunachal Pradesh
Correct Answer: Bihar
Question 13.The instrument used for measuring the Purity/ Density or richness of Milk is
Options:
a) Glucometer
b) Hydrometer
c) Spectrometer 㺈
d) Lactometer
Correct Answer: Lactometer
Question 14.Who is the founder of Art of Living concept
Options:
a) Sri sri Ravi Shankar
b) Baba Ramdev
c) Morari Bapu
d) Aasaram Bapu
Correct Answer: Sri sri Ravi Shankar
Question 15.The Secretariat of SAARC is located at : SAARC
Options:
a) Colombo
b) Kathmandu
c) Dhaka
d) New Delhi
Correct Answer: Kathmandu
Question 16.What is dry ice?
Options:
a) frozen ammonia
b) frozen carbon monoxide
c) frozen carbon dioxide
d) frozen hydrogen oxide
Correct Answer: frozen carbon dioxide
Question 17.Brightest planet of our solar system is
Options:
a) Mars
b) Venus
c) Jupiter
d) Mercury
Correct Answer: Venus
Question 18.Decimal system of number originated in ?
Options:
a) Greece
b) Germany
c) China
d) India
Correct Answer: India Question
19.Which one among the following is a source of renewable energy?
Options:
a) Wood
b) Fossil fuel
c) Wind power
d) Coal
Correct Answer: Wind power
Question 20.Which one of the following pairs is incorrect?
Options:
a) Jeev Milkha Singh Golf
b) Irfan Pathan Cricket
c) Sania Mirza Badminton
d) Saba AnjumHockey
Correct Answer: Sania Mirza Badminton
Question 21.Let A and B be non–singular square matrices of the same order. Consider the following statements.
I. (AB)T = ATBT
II. (AB)1 =B1A1
III. adj(AB) = (adj.A)(adj.B)
IV. ρ(AB)= ρ(A) ρ(B)
V. |AB| = |A|.|B|
Which of the above statements are false?
Options:
a) I, III & IV
b) IV & V
c) I & II
d) All of these
Correct Answer: I, III & IV Question
22.
Options:
a) Log (e x 1)
b) Log (1 e x )
c) Log (e x 1)
d) Log (1 e x )
Correct Answer: Log (1 e x )
Question 23.The divergence of vector xi+yj+zk is
Options:
a) i+j+k
b) 3
c) 0
d) 1 AglaSem
Career Correct Answer: 3
Question 24.The transpose of the Cofactor Matrix is called
Options:
a) Adjoint matrix
b) Skew symmetric matrix ̾
c) Cofactor matrix
d) None of these
Correct Answer: Adjoint matrix
Question 25.∫π/2 0 (log tanx) dx equal to ∫π/2 0 (log tanx) बराबर है:
Options:
a) π/2loge2
b) π/2loge2
c) π/2loge2
d) 0
Correct Answer: 0
Question 26.Every diagonal element of a skewsymmetric matrix is
Options:
a) 1
b) 0
c) Purely real
d) None of these
Correct Answer: 0
Question 27.Which one of the following ia an analytic
function
Options:
a) f(z)=sinz
b) f(z)=z
c) f(z)=Rz
d) f(z)=Im(z)
Correct Answer: f(z)=sinz
Question 28.Differential equation are equations that
involve ____________ Variables and their ___________ with respect to the
____________ variables.
Options:
a) dependent, derivatives, independent
(dependent, derivatives, independent)
b) independent, derivatives, independent
(independent, derivatives, independent)
c) dependent, derivatives, dependent
(dependent, derivatives, dependent)
d) none of these
Correct Answer: dependent, derivatives, independent
(dependent, derivatives, independent)
Question 29.The Fourier Transformation of a sine wave is
Options:
a) Straight line parallel to X axis
b) Straight Line parallel to Y Axis
c) A Sine Wave
d) Line Passing throug (0,0)
Correct Answer: Straight Line parallel to Y Axis
Question 30.First Order Differentation of any funtion at a point is
Options:
a) Slope of Perpendicular to function at that point
b) Slope of tangent to function at that point
c) Value of funtion at that point
d) None of these
Correct Answer: Slope of tangent to function at that point
Question 31.The function ƒ(x) = 3x(x2) has :
Options:
a) minimum at x=1
b) maximum at x=1
c) minimum at x=2
d) maximum at x=2
Correct Answer: minimum at x=1
Question 32.
Options:
a) 1/9 log (4+9) + e
b) 1/9 log (4+9) + e
c) 1/9 log (4+9) e
d) none
Correct Answer: none
Question 34.∫ sec 3x tan 3x dx =
Options:
a) 1/3 sec 3 x + c
b) 1/3 sec 3 x + c
c) 1/3 sec x
2 + c
d) none
Correct Answer: 1/3 sec x
2 + c
Question 35.∫ sin 2 3x dx =
Options:
Question 36.
Options:
a) a=2
b) a=1
c) a = 2
d) a = 1
Correct Answer: a=2
Question 37.If the vectors 2i3j+k , 3i+xj+k are orthogonal then x= 2i3j+k , 3i+xj+k
Options:
a) 2
b) 4
c) 2
d) 1
Correct Answer: 4
Question 38.Find the angle between two vectors a and b with magnitudes √3 and 2
respectively having a.b=√6
√3 and 2
Options:
a) 45°
b) 90°
c) 180°
d) 30°
Correct Answer: 45°
Question 39.Uranium ( Z= 92, A= 238) emits a particle. The product has A and Z
Options:
a) 236, 92
b) 234,90
c) 238,90
d) 236,90
Correct Answer: 234,90
Question 40.Most penetrating radiation of radioactive element is
Options:
a) α rays
b) γ rays
c) β rays
d) X rays
Correct Answer: γ rays
Question 41.Any length of transmission line may be made to appear as an infinitely long line by
Options:
a) leaving the line open at the end
b) increasing the standing wave ratio above unity
c) shorting the line at the end
d) terminating the line in its characteristic impedance
Correct Answer: terminating the line in its characteristic impedance
Question 42.Which of the follwing can be used to measures rms, peak and averge value of an a.c voltage ?
I) Hotwire instrument.
II) Rectifer instrument.
III) Megger.
IV) CRO
Options:
a) I and II only
b) II and III Only
c) III Only
d) IV Only
Correct Answer: IV Only
Question 43.Flux meter uses which of the following effect
Options:
a) Magnet effect
b) Induction Effect
c) Hall Effect
d) electrical effect
Correct Answer: Hall Effect
Question 44.The Qmeter works on the principle of
Options:
a) mutual inductance 㹬
b) self inductance
c) series resonance
d) parallel resonance
Correct Answer: series resonance
Question 45.A converging lens is used to form an image on a screen. When the upper half of the lens is covered by an opaque screen
Options:
a) half of the image will disappear
b) image will not form on the screen
c) intensity of image will increase
d) intensity of image will decrease
Correct Answer: intensity of image will decrease
Question 46.A stone is dropped in a well and splash is heard after 1.5 seconds after the stone hits the surface. If the velocity of sound is 327 m/s, the depth of well is
Options:
a) 218 m
b) 227 m
c) 490.5 m
d) None of these
Correct Answer: 490.5 m
Question 47.A cinema Hall has volume of 7500 m3
It is required to have reverberation time of 1.61 seconds. The total absorption in the hall should be _______ (consider 0.161 as multiplication factor in the relavent formula)
Options:
a) 7500 sabians
b) 750 sabians
c) 1980W m2
d) 995 OWU
Correct Answer: 995 OWU
Question 48.Potential Difference is
Options:
a) Scalar Quantity
b) Vector Quantity
c) Both Scalar Quantity & Vector Quantity
d) None of these
Correct Answer: Scalar Quantity
Question 49.Light will undergo a path difference of lamda/2
Options:
a) glassair
b) glasswater
c) glassdiamond
d) airalcohol
Correct Answer: glassdiamond
Question 50.Visible spectrum lies between
Options:
a) radio waves and micro waves
b) infrared spectrum and ultraviolet rays
c) microwaves and infrared spectrum
d) x rays and gamma rays
Correct Answer: microwaves and infrared spectrum
Question 51.Laser is a device for
Options:
a) production of beam of white light
b) producing a beam of nonchromatic light
c) producing a beam of high intensity rays
d) producing a beam of highly penetrating xrays
Correct Answer: producing a beam of high intensity rays
Question 52.The phenomenon of resonance is used in
Options:
a) radio
b) capacitor
c) transformer
d) amplifier
Correct Answer: radio
Question 53.Unit of wave length is
Options:
a) λ
b) meter
c) μs1
d) second
Correct Answer: μs1
Question 54.The intra molecular attraction in solids is
Options:
a) low
b) the greatest
c) nil
d) fairly good
Correct Answer: the greatest
Question 55.Very smalltime intervals are accurately measured by the
Options:
a) Pulsars
b) White dwarfs
c) Atomic clocks
d) Quartz clocks
Correct Answer: Atomic clocks
Question 56.Waves traveling through a solid medium are _____
Options:
a) Transverse waves
b) Longitudinal waves
c) either of the both
d) None
Correct Answer: either of the both
Question 57.A 680 Ω load resistor RL, is connected across
a constant current source of 1.2 A. The internal source resistance, RS, is 12 k
Ω . The load current
through RL, is
Options:
a) 12 A
b) 1.2 A
c) 114 mA
d) 1.14 A
Correct Answer: 1.14 A
Question 58.A battery has a short circuit current of 30 A
and open circuit voltage of 24 V. If the battery is connected to an electric
bulb of resistance 2 Ω, the power
dissipated by the bulb is
Options:
a) 80 W
b) 1800 W
c) 112.5 W
d) 228 W
Correct Answer: 112.5 W
Question 59.While thevenizing a circuit between two terminals,Vth equals
Options:
a) short circuit terminal voltage
b) open circuit terminal voltage
c) EMF of the battery nearest to the terminals
d) net voltage available in the circuit
Correct Answer: open circuit terminal voltage
Question 60.While calculating thevenin resistance (Rth) ,constantcurrent sources in the circuit are
Options:
a) replaced by 'opens'
b) replaced by 'shorts'
c) treated in parallel with other voltage sources
d) converted into equivalent sources
Correct Answer: replaced by 'opens'
Question 61.Ampere second could be the unit of
Options:
a) power
b) conductance
c) energy
d) charge
Correct Answer: charge
Question 62.The above results were obtained from measurements taken between the two terminal of a resistive network . The Thevenin resistance of the network is
Options:
a) 16 Ω
b) 8 Ω
c) 0
d) ∞
Correct Answer: 8 Ω
Question 63.For the circuit find the equivalent thevenin's volatge and resistance
Options:
a) 100V , 75 Ω
b) 100V , 55 Ω
c) 155V , 75 Ω
d) 155V , 55 Ω
Correct Answer: 155V , 55 Ω
Question 64.In a network consisting of linear resistors and ideal voltage source, if the value of resistors are doubled, then voltage across each resistor
Options:
a) increases 4 times
b) remains unchanged
c) doubled
d) reduced to half value
Correct Answer: remains unchanged
Question 65.The rms value of the current in a wire which carries a d.c. current of 10 A and a sinusoidal alternating current of peak value 20 A is
Options:
a) 10A
b) 14.14A
c) 17.32A
d) 15A
Correct Answer: 17.32A
Question 66.Four 100 W bulbs are connected in parallel across 200V supply line. If one bulb gets fused then :
Options:
a) no bulb will light
b) all the four bulbs will light
c) rest of the three bulbs will light
d) None of these
Correct Answer: rest of the three bulbs will light
Question 67.Petroleum jelly is applied to the terminals of the lead acid battery in order to prevent
Options:
a) corrosion
b) local heating
c) shortcircuiting
d) all of these
Correct Answer: corrosion
Question 68.A fuse is provided in an electric circuit for
Options:
a) safeguarding the installation against heavey current
b) reducing the current flowing in the circuit
c) reducing the power consumption
d) All of these
Correct Answer: safeguarding the installation against heavey current
Question 69.A 60% lagging power factor implies that the load is
Options:
a) inductive
b) capacitive
c) inductive or capacitive
d) resistive
Correct Answer: inductive
Question 70.________ is a unit used in radio astronomy to measure the strength (flux density) of radio signals from space
Options:
a) Amp
b) Jansky
c) Hertz
d) Knot
Correct Answer: Jansky
Question 71.Nortan's Theorem results in
Options:
a) a Current source with an impedance in Parallel
b) a Voltage source with an impedance in series
c) a Voltage source alone
d) a Current source alone
Correct Answer: a Current source with an impedance in Parallel
Question 72.An ideal voltage source will charge an ideal capacitor
Options:
a) in Infinite time
b) Exponentially
c) Instantaneously
d) None of these
Correct Answer: Instantaneously
Question 73.Reluctance in Magnetic circuits is analogues to ____________in electric circuit
Options:
a) Resistance
b) Voltage
c) current
d) Power
Correct Answer: Resistance
Question 74.Two capacitors of 2 μF and 3μF are connected in series across 10V. The potential difference across the 2 μF capacitor will be
Options:
a) 4V
b) 6V
c) 10V
d) 0V
Correct Answer: 6V
Question 75.If you need to design a relaxation oscillator circuit. The most likely device to use might be
Options:
a) a SCR
b) a UJT
c) a Triac
d) All of these
Correct Answer: a UJT
Question 76.The ripple factor of a power supply is a measure of
Options:
a) its filter efficiency
b) its voltage regulation
c) diode rating
d) purity of power output
Correct Answer: its filter efficiency
Question 77.Crossover distortion occurs in
Options:
a) pushpull amplifiers
b) class a amplifiers
c) class B amplifiers
d) class AB amplifiers
Correct Answer: pushpull amplifiers
Question 78.The maximum number of electrons which the valence shell of an atom can have is
Options:
a) 6
b) 8
c) 18
d) 2
Correct Answer: 8
Question 79.Doping materials are called impurities because they
Options:
a) decrease the number of charge carriers
b) change the chemical properties of semiconductors
c) make semiconductors less than 100 percent pure
d) alter the crystal structures of pure semiconductors
Correct Answer: alter the crystal structures of pure semiconductors
Question 80.In a PNPN diode, breakover condition is marked
by
Options:
a) a sudden decrease in current
b) a sudden increase in current
c) diode getting burnt off
d) a sudden glow taking place
Correct Answer: a sudden increase in current
Question 81.In an amplifier, the output current flows for 200° of input cycle. The class of operation of the amplifier is
Options:
a) A
b) AB
c) B
d) C
Correct Answer: AB
Question 82.In an PN junction depletion layer is created due to
Options:
a) Diffusion of ions
b) Diffusion of Minority carriers
c) Diffusion of Majority carriers
d) Diffusion of Minority & Majority carriers
Correct Answer: Diffusion of Majority carriers
Question 83.In a schmitt Trigger UTP=12V, LTP=8V, the hysterises VH is
Options:
a) 12V
b) 8V
c) 4V
d) 20V
Correct Answer: 4V
Question 84.In a transistor, β may be expressed in terms of α as below:
Options:
a) α/1α
b) α/1+α
c) 1+α/α
d) 1α/α
Correct Answer: α/1α
Question 85.Input resistances Ri of ideal voltage amplifier and ideal current amplifier are respectively
Options:
a) ∞, 0
b) 0, ∞
c) ∞, ∞
d) 0, 0
Correct Answer: ∞, 0
Question 86.In a class AB amplifier with sinusoidal input signal, the output current flows for
Options:
a) half the cycle
b) full cycle
c) less than half cycle
d) more than half cycle
Correct Answer: more than half cycle
Question 87.The 3dB frequency of an amplifier is one at which gain reduces to
Options:
a) unity
b) zero
c) 1/√2 of its midband value
d) half of its midband value
Correct Answer: 1/√2 of its midband value
Question 88.In a single tuned capacitance coupled amplifier, the frequency response depends on
Options:
a) only the input circuit
b) only the output circuit
c) both input and output circuits
d) neither input circuit nor the output circuit
Correct Answer: only the output circuit
Question 89.Monostable multvibrator may be used to generate
Options:
a) sweep voltage
b) pulses
c) sinusoidal voltage
d) sweep current
Correct Answer: pulses
Question 90.The maximum ac power output from a class A power amplifier is 10 W. What should be the minimum power rating of the transformer used?
Options:
a) 10 W
b) 15 W
c) 5 W
d) 20 W
AglaSem Career
Correct Answer: 20 W
Question 91.If a high degree of selectivity is desired, then doubletuned circuit should have
Options:
a) Loose coupling
b) Tight coupling
c) Critical coupling
d) none of these
Correct Answer: Loose coupling
Question 92.A semiconductor has _________ temperature coefficient of resistance
Options:
a) Positive
b) Zero
c) Negative
d) None of these
Correct Answer: Negative
Question 93.The Boolean function Y = AB + CD is to be realized using only 2 input NAND gates. The minimum number of gates required is
Options:
a) 2
b) 3
c) 4
d) 5
Correct Answer: 3
Question 94.Which of the following Boolean Expressions correctly represents the relation between P, Q, R and M1
Options:
a) M1 = (P OR Q) XOR R
b) M1 = (P AND Q)X OR R
c) M1 = (P NOR Q)X OR R
d) M1 = (P XOR Q) XOR R
Correct Answer: M1 = (P XOR Q) XOR R
Question 95.If the input to the digital circuit (in the
figure) consisting of a cascade of 20 XOR gates is X, then the output Y is
equal to
Options:
a) 0
b) 1
c) X̄
d) X
Correct Answer: 1
Question 96.A sequential circuit using D flipflop and logic gates is shown in the figure, where X and Y are the inputs and Z is the output . The circuit isD
Options:
a) S R FlipFlop with inputs X = R and Y = S
b) S R FlipFlop with inputs X = S and Y = R
c) J K FlipFlop with inputs X = J and Y = K
d) J K FlipFlop with input X = K and Y = J
Correct Answer: J K FlipFlop with input X = K and Y = J
Question 97.A ring counter consisting of five flipflops will have
Options:
a) 5 states
b) 10 states
c) 32 states
d) infinite states
Correct Answer: 5 states
Question 98.Which one of the following logic families can be operated using supply voltage from 3V to 15 V ?
Options:
a) TTL
b) ECL
c) PMOS
d) CMOS
Correct Answer: CMOS
Question 99.USB Flash Drive ( USB Memory stick / Pen drive) is
Options:
a) SRAM
b) DRAM
c) Volatile Memory
d) NonVolatile memory
Correct Answer: NonVolatile memory
Question 100.NOR Gate is equal to
Options:
a) OR Gate with negated inputs
b) NAND gate with negated output
c) NAND gate with negated input
d) None of these
Correct Answer: NAND gate with negated input
Question 101.The charge of an electron is :
Options:
a) 1.6 x 1017 Coulomb
b) 1.6 x 1019 Coulomb
c) 1.6 x 1021 Coulomb
d) 1.6 x 1023 Coulomb
Correct Answer: 1.6 x 1019 Coulomb
Question 102.Oscillators are widely used in
Options:
a) radio broadcasting
b) television broadcasting
c) radio and television recieiver
d) All of these
Correct Answer: All of these
Question 103.264 का दशमलव तु癰Ā है:
Options:
a) 180
b) 170
c) 166
d) none
Correct Answer: 170
Question 104.Which of the following circuit can be used as parallel to serial convertor
Options:
a) digital counter
b) decoder
c) demultiplexer
d) multiplexer
Correct Answer: multiplexer
Question 105.A string of 4 bits is called as
Options:
a) Bit
b) Byte
c) Word
d) Nibble
Correct Answer: Nibble
Question 106.When the Input to a seven segment decoder is "0100" the number on display will be
Options:
a) 0
b) 2
c) 4
d) 9
Correct Answer: 4
Question 107.Which of the following hexadecimal numbers represents an odd decimal number
Options:
a) FF
b) EG
c) CC
d) AA
Correct Answer: FF
Question 108.Halfadder is also known as
Options:
a) AND circuit
b) NAND circuit
c) NOR circuit
d) EXOR circuit
Correct Answer: EXOR circuit
Question 109.Logic 1 in positive logic system is represented by
Options:
a) zero level
b) lower voltage level
c) higher voltage level
d) negative voltage
Correct Answer: higher voltage level
Question 110.Which of the following logic circuits accepts two binary digits on its inputs and produce
Options:
a) full adder
b) half adder
c) decoder
d) multiplexer
Correct Answer: half adder
Question 111.Major disadvantage of using three sets of SCRs for variable voltage speed control of a SCIM is the
Options:
a) Considerable I2R loss
b) Poor power factor
c) Long delay of thyristor firing pulses
d) Necessity of using a processor
Correct Answer: Considerable I2R loss
Question 112.Which of the following connection is best suited for 3 phase 4 wire service?
Options:
a) ΔΔ
b) YY
c) ΔY
d) YΔ
Correct Answer: ΔY
Question 113.For the threephase circuit shown in the figure the ratio of the currents IR IYI I B is given by
Options:
a) 1:1:√3
b) 1:1:2
c) 1:1:1
d) 1:1:√2
Correct Answer: 1:1:√3
Question 114.A transformer transforms
Options:
a) frequency
b) voltage
c) current
d) voltage and current
Correct Answer: voltage and current
Question 115.Delta/star or star/delta transformation technique is applied to
Options:
a) one terminal network
b) two terminal network
c) three terminal network
d) none of these
Correct Answer: three terminal network
Question 116.The resonance frequency w of RLC circuit is defined as
Options:
a) Sqrt(LC)
b) 1/Sqrt(LC)
c) Sqrt(R/LC)
d) Sqrt(LC/R)
Correct Answer: 1/Sqrt(LC)
Question 117.Trickle charging of storage battery helps to __________
Options:
a) prevent sulphation
b) keep it fresh and fully charged
c) maintain proper electrolyte level
d) increase its reserve capacity
Correct Answer: keep it fresh and fully charged
Question 118.The main purpose of using core in a transformer is to _____________
Options:
a) decrease iron losses
b) prevent eddy current
c) decrease reluctance of the common magnetic circuit
d) eliminate magnetic hysteresis
Correct Answer: decrease reluctance of the common magnetic circuit
Question 119.In a synchronous machine, in case the axis of field flux is in line with the armature flux then ______________
Options:
a) the machine is working as synchronous motor
b) the machine is working as synchronous generator
c) the machine is said to be floating
d) the machine will vibrate violently
Correct Answer: the machine is said to be floating
Question 120.Which of the following pair is used for
frequency converter ?
Options:
a) Squirrel cage induction motor and synchronous motor
b) Wound rotor induction motor and synchronous motor
c) wound rotor induction motor and squirrel cage induction motor
d) Any of these
Correct Answer: Squirrel cage induction motor and synchronous motor
Question 121.The direction of rotation of d.c. motor can be reversed by_______
Options:
a) reversing the connections of both armature and the field winding
b) reversing the connection of either the armature or field winding
c) reducing the field flux
d) introducing extra resistance in the armature circuit
Correct Answer: reversing the connection of either the armature or field winding
Question 122.In order to achieve all day efficiency in a transformer
Options:
a) The copper losses should be less
b) The operating temperature should be low
c) The shell type construction should be used
d) The iron losses should be less
Correct Answer: The copper losses should be less
Question 123.The surge impedance value of overhead lines is
Options:
a) 50 to 100 ohms
b) 400 to 600 ohms
c) 800 to 1000 ohms
d) 10 to 50 ohms
Correct Answer: 800 to 1000 ohms
Question 124.What is the beamwidth between nulls of a 2m paraboloid reflector used at 6 GHz?
Options:
a) 7 degrees
b) 3.5 degrees
c) 1.75 degrees
d) 5 degrees
Correct Answer: 3.5 degrees
Question 125.A 1 mW signal having a bandwidth of 100 MHz is transmitted to a receiver through cable that has 40 dB loss. If the effective oneside noise spectral density at the receiver is 1020 Watt/Hz, then the signal to noise ratio at the receiver is
Options:
a) 50 dB
b) 30 dB
c) 40 dB
d) 60 dB
Correct Answer: 50 dB
Question 126.The preemphasis circuit is used
Options:
a) After modulation
b) prior to modulation
c) to increase or emphasis the amplitude of low frequency components of the
signal
d) None of these
Correct Answer: prior to modulation
Question 127.Microwave MB_Communication uses_________ amplifier to obtain large gain over wide bandwidth
Options:
a) Reflex Klystron
b) PiMode Magnetron
c) Travelling wave Tube
d) All of these
Correct Answer: Travelling wave Tube
Question 128.Boosting of higher audio frequencies in FM to improve noise immunity is called
Options:
a) DeEmphasis
b) Preemphasis
c) Compression
d) Expansion
Correct Answer: Preemphasis
Question 129.In an FM system, when the AF is 500 Hz and the AF voltage is 2.4 V, the deviation is 4.8 kHz. If the AF voltage is now increased to 7.2 V, the new deviation will be
Options:
a) 4.8 KHz
b) 9.6 KHz
c) 14.4 KHz
d) 28.8 KHz
Correct Answer: 14.4 KHz
Question 130.When a broadcast AM transmitter is 50 %
modulated, its antenna current is 12 A. What will be the current when the
modulation depth is increased to
90% ?
Options:
a) 13.4 A
b) 12.9 A
c) 16.6 A
d) 21.8 A
AglaSem Career
Correct Answer: 13.4a
Question 131.Which of the following has the least wave length ?
Options:
a) Ultraviolet
b) UHF
c) Infrared
d) Xrays
Correct Answer: Xrays
Question 132.Under which of the following situations, fading will not occur ?
Options:
a) the frequency of the signal is high
b) A single sky wave is present
c) Many sky waves arrive by different path
d) None of these
Correct Answer: None of these
Question 133.Which of the following frequency bands fall under microwave frequency
Options:
a) UHF and SHF
b) SHF and EHF
c) VLF, LF and MF
d) UHF, SHF and EHF
Correct Answer: UHF, SHF and EHF
Question 134.One dit is equal to ___________
Options:
a) 1.14 bits
b) 3.32 bits
c) 1.17 bits
d) none of these
Correct Answer: 3.32 bits
Question 135.Speech signal frequency may lies between
Options:
a) 015 Khz
b) 15 Hz to 15 KHz
c) 150 KHz
d) 01 MHz
Correct Answer: 01 MHz
Question 136.Indicate which of the following system is digital
Options:
a) PPM
b) PCM
c) PWM
d) PFM
Correct Answer: PCM
Question 137.An ideal filter should have
Options:
a) Infinite attenuation in the attenuation band.
b) Infinite attenuation in the pass band
c) Zero attenuation in the attenuation band.
d) Zero attenuation in the pass band
Correct Answer: Zero attenuation in the pass band
Question 138.A line becomes distortion less if
Options:
a) It is properly matched
b) LG=CR
c) LC=GR
d) It is terminated into Zo
Correct Answer: LG=CR
Question 139.A network is said to be reciprocal if
Options:
a) Z12=Z21
b) Y12=Y21
c) ADBC=1
d) all of these
Correct Answer: all of these
Question 140.Attenuators are used
Options:
a) to increase the signal level
b) to reduce the signal level
c) to maintain the signal level constant
d) None of these
Correct Answer: to reduce the signal level
Question 141.The intrinsic impedance of free space is
Options:
a) 75Ω
b) 37Ω
c) 377Ω
d) 3670Ω
Correct Answer: 377Ω
Question 142.What is the characteristic impedance of the
transmission line of inductance 144 H/m and capacitance of 100 F/m
Options:
a) 12Ω
b) 14Ω
c) 1.2Ω
d) 120Ω
Correct Answer: 1.2Ω
Question 143.The Characteristic Impedance of a low pass filter in attenuation Band is
Options:
a) Complex quantity.
b) Real value.
c) Zero
d) Purely imaginary.
Correct Answer: Purely imaginary.
Question 144.LDAP works on the ________ layer of OSI Model
Options:
a) Physical
b) Network
c) Data Link
d) Transport
Correct Answer: Data Link
Question 145.With every increase in 3 dB of power level
Options:
a) The power becomes half
b) Power increases by one unit
c) Power reduces by one unit
d) Power becomes double
Correct Answer: Power becomes double
Question 146.The impact of rains on microwave communication is higher in
Options:
a) Lower Frequency Range
b) Medium Frequency Range
c) No Impact at all
d) Higher Frequency Ranges
Correct Answer: No Impact at all
Question 147.For transmission matching over a range of frequencies, it is best to use a ___________
Options:
a) single stub of adjustable position
b) double stub
c) broadband directional coupler
d) balun
Correct Answer: double stub
Question 148.A 50 watt light bulb burns an average of 10 hrs a day for one week. The total kilowatt hour consumption is
Options:
a) 3.5
b) 35
c) 0.35
d) 0.035
Correct Answer: 0.35
Question 149.A 12 V battery with an internal resistance
0.5 ohms feeds a series circuit containing 20 ohms, 10 ohms, and R. Find the
value of R if the current in the
circuit is 0.2A.
Options:
a) 14.5 ohms
b) 15.5 ohms
c) 4.5 ohms
d) 5.5 ohms
Correct Answer: 15.5 ohms
Question 150.An ammeter has a current range of 05 A, and its internal resistance is 0.2 Ω. In order to change the range to 025 A, we need to add a resistance of
Options:
a) 0.05 Ω in parallel with the meter
b) 0.04 Ω in parallel with the meter
c) 1.0 Ω in series with the meter
d) 0.8 Ω in series with the meter
Correct Answer: 0.05 Ω in parallel with the meter
Question 151.A device used to display one or more digital signals so that they can be compared to expected timing diagrams for the signals is a
Options:
a) DMM
b) Spectrum analyzer
c) Logic Analyzer
d) Frequency counter
Correct Answer: Logic Analyzer
Question 152.An LVDT is used to measure displacement. The
LVDT feeds a volmeter of 05 V range through a 250 gain amplifier. For a
displacement of 0.5mm the
output of LVDT is 2mV. The sensitivity of instrument is
Options:
a) 0.1 V/mm
b) 0.5 V/mm
c) 1 V/mm
d) 5 V/mm
Correct Answer: 1 V/mm
Question 153.The measure of mismatch between the load and the transmission line is known as __________
Options:
a) directivity
b) (Igain)
c) reflection coefficient
d) standing wave ratio
Correct Answer: reflection coefficient
Question 154.A galvanometer has _________
Options:
a) air friction damping
b) fluid friction damping
c) eddy current damping
d) spring coil damping
Correct Answer: eddy current damping
Question 155.Thermocouples are _____
Options:
a) passive transducers
b) both active and passive transducers
c) output transducers
d) active transducers
Correct Answer: active transducers
Question 156.Dummy strain guages are used for _______________
Options:
a) calibration of strain gauges
b) increasing the sensitivity of bridge in which they are included
c) compensating for different expansion
d) compensation of temperature changes
Correct Answer: compensation of temperature changes
Question 157.A meter connected in parallel with a
component to measure ___
Options:
a) Voltage
b) Current
c) Power
d) None
Correct Answer: None
Question 158.When the D.C. Voltmeter is connected with polarities reversed
Options:
a) The pointer deflects upscale
b) The pointer deflects downscale
c) The pointer remains stationery
d) None
Correct Answer: The pointer deflects upscale
Question 159.Voltmeter sensitivity is defined by
Options:
a) Volt/ohm
b) Volt/ohm2
c) Ohm/volt
d) Ohm/volt2
Correct Answer: Ohm/volt2
Question 160.An oscilloscope indicates:
Options:
a) Peak to peak value of voltage
b) DC value of voltage
c) Average value of a A.C. voltage
d) RMS value of a A.C. voltage
Correct Answer: RMS value of a A.C. voltage
Question 161.Which of the instrument is used for a.c. and d.c.
Options:
a) moving iron (attraction type) ammeter
b) moving iron (repulsion type) voltmeter
c) permanent magnet type ammeter
d) induction type meter
Correct Answer: permanent magnet type ammeter
Question 162.A high Q coil has a
Options:
a) high band width
b) low power factor
c) high losses
d) a flat response
Correct Answer: low power factor
Question 163. A Lag network for compensation normally consists of
Options:
a) R, L and C elements
b) R and L elements
c) R and C elements
d) R only
Correct Answer: R and C elements
Question 164. The pole–zero plot given in fig. below is that of a
Options:
a) PID controller
b) PD controller
c) Integrator
d) Lag–lead compensating network
Correct Answer: Lag–lead compensating network
Question 165.The impulse response of a LTI system is a unit step function, then the corresponding
Options:
a) 1/s
b) s
c) 2s
d) 0
Correct Answer: 1/s
Question 166.Determine the range of K for stability of unity feedback system whose open loop transfer function is G(s)=K/s(s+1)(s+2)
Options:
a) 10
b) 15
c) 6
d) 0
Correct Answer: 0
Question 167.The unity feedback control system has a
forward path transfer funtion equal to 42.25/s(s+6.5). The unit step response of
this system starting from rest,
will have its maximum valute at a time equal to
Options:
a) 0 sec
b) 0.56 sec
c) 5.6 sec
d) infinity
Correct Answer: infinity
Question 168.Peak time tp
, is the time required for the response to reach the ______ peak of the over
shoot
Options:
a) 1st
b) 2nd
c) 3rd
d) none of these
Correct Answer: 1st
Question 169.Which of the following is the analogous pair under force current analogy?
Options:
a) Massinductance
b) Forcecapacitance
c) Displacementcharge
d) Viscous friction coefficientreciprocal of resistance 汼Āानता घष⻆ण
Correct Answer: Viscous friction coefficientreciprocal of resistance 汼Āानता घष⻆ण
Question 170.The negative real axis of Nyquist plot corresponds to the _____
Options:
a) a negative 180 degree phase line of Bode plot
b) a positive 180 degree phase line of Bode plot
c) 0 db line Bode plot
d) none of these
Correct Answer: a negative 180 degree phase line of Bode plot
Question 171.With feedback system _______________
Options:
a) the transient response gets magnified
b) transient response decays at a constant rate
c) the transient response decays slowly
d) the transient response decays more quickly
Correct Answer: the transient response decays slowly
Question 172.A regulator that contains four phase lags at
t1
sec, t2 = 0.1 sec, t3
, t4 = 0.01 sec, is stable if its steady state gain is __________
Options:
a) 10 db
b) 30 db
c) 20 db
d) none of these
Correct Answer: 20 db
Question 173.The ideal amplifier takes current from the input source as
Options:
a) In milliampere
b) Zero
c) In ampere
d) In megaampere
Correct Answer: In ampere
Question 174.The system response can be tested with
Options:
a) Sinusoidal input signal
b) Unit impulse input signal
c) Ramp input signal
d) Exponentially decaying signal
Correct Answer: Ramp input signal
Question 175.In a critically damped system, the damping factor of the system is
Options:
a) zero
b) less than unity
c) unity
d) greater than unity
Correct Answer: less than unity
Question 176.The minimum number of MOS tranistors required to make a dynamic RAM cell is
Options:
a) 4
b) 3
c) 2
d) 1
Correct Answer: 1
Question 177.The number of status flag present in 8085 are
Options:
a) 5
b) 8
c) 10
d) 16
AglaSem Career
Correct Answer: 5
Question 178.The range of address where the Interrupt service procedures are stored is
Options:
a) 00000 000FFH
b) 00000 001FFH
c) 00000 002FFH
d) 00000 003FFH
Correct Answer: 00000 003FFH
Question 179.FAR CALL or FAR JUMP is to branch if program area is outside ________segment in 8086
Options:
a) 4KByte
b) 16KByte
c) 32KByte
d) 64KByte
Correct Answer: 64KByte
Question 180.The output resistance of a voltage source is 4 ohm. Its internal resistance will be
Options:
a) 4 ohm
b) 2 ohm
c) 1 ohm
d) infinite
Correct Answer: 4 ohm
Question 181.Normally Internet traffic is measured in
Options:
a) Volts
b) Mbps
c) Erlangs
d) Watts
Correct Answer: Mbps
Question 182.Computational circuitry in a CPU is reffered to as the ____________
Options:
a) ALU
b) Program Counter
c) ROM
d) RAM
Correct Answer: ALU
Question 183.Which of the following instructions are not used by the 8080 MPU ?
Options:
a) RIM, STA
b) SIM, STA
c) STA, XCHG
d) RIM, SIM
Correct Answer: RIM, SIM
Question 184.Decimal 15 equals ____ in binary.
Options:
a) 0111
b) 1111
c) 1011
d) 1101
Correct Answer: 1101
Question 185.Which of the following functions is not performed by a microprocessor?
Options:
a) Controlling timing of information flow.
b) Performing the computing tasks specified in a program
c) Communicating with all peripherals using system bus
d) Storing results and date
Correct Answer: Storing results and date
Question 186. The number of bytes in an instruction for 8085 can be
Options:
a) One or two
b) One, two or three
c) Two only
d) One only
Correct Answer: One only
Question 187.The memory addressing capacity of 8086 is
Options:
a) 32 KB
b) 64 KB
c) 1 Megabyte
d) 32 Megabyte
Correct Answer: 1 Megabyte
Question 188.In 8086, the physical address of an instruction contains _______ bits.
Options:
a) 10
b) 16
c) 18
d) 20
Correct Answer: 18
Question 189.Which of the following code will
remove all the rows from the table LOCATIONS?
Options:
a) DROP TABLE LOCATIONS
b) DELETE TABLE LOCATIONS
c) TRUNCATE TABLE LOCATIONS
d) None of these
Correct Answer: TRUNCATE TABLE LOCATIONS
Question 190.Which protocol does DHCP use at the Transport layer?
Options:
a) IP
b) TCP
c) UDP
d) ARP
Correct Answer: UDP
Question 191.TCP port Number for http services is
Options:
a) 21
b) 22
c) 80
d) 88
Correct Answer: 80
Question 192.The Characteristic equation of T flip flop is
Options:
a) Q= T'Q+TQ'
b) Q=T'Q'+QT'
c) Q=TQ
d) Q=TQ'
Correct Answer: Q= T'Q+TQ'
Question 193.ASCII stands for
Options:
a) American standard code for information Interchange
b) American scientific code for information Interchange
c) American standard code for intelligent Interchange
d) American scientific code for intelligent Interchange
Correct Answer: American standard code for information Interchange
Question 194.The highest modulation frequency typically used in AM broadcast is
Options:
a) 5 KHz
b) 10 KHz
c) 15 KHz
d) 1 MHz
Correct Answer: 5 KHz
Question 195.In RC inductive reactance, FET is so arranged that
Options:
a) Xc>R
b) Xc
c) Xc=R
d) Xc=10 R
Correct Answer: Xc
Question 196.Which of the following operations is not performed by the CPU of a computer system ?
Options:
a) Arithmetic operation
b) Providing timing signal
c) control instruction processing
d) None of these
Correct Answer: Providing timing signal
Question 197.The data transfer rate of a double density floppy disc system is about ________
Options:
a) 5 Kbits/sec
b) 50 Kbits/sec
c) 500 Kbits/sec
d) 5000 Kbits/sec
Correct Answer: 500 Kbits/sec
Question 198.The decimal fraction 0.375 in binary form is ____________
Options:
a) 0.0011
b) 0.111
c) 0.011
d) 0.0111
Correct Answer: 0.011
Question 199.Hardware of the computer is
Options:
a) physical component
b) programing component
c) hard component
d) none of these
Correct Answer: programing component
Question 200._________ is a low level language
Options:
a) Fortran
b) Machine Language
c) binary
d) Pascal
Correct Answer: Fortran
Click Here To Download Full Paper